smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-38-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-1ER162 Serial Number: Z4Y6QJ1T LU WWN Device Id: 5 000c50 07b0530c8 Firmware Version: CC45 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Jun 6 11:04:25 2018 BRT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 80) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 108) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 242177936 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1445 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 24 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 175367438 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 4223 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1441 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 007 007 000 Old_age Always - 93 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 0 0 19 189 High_Fly_Writes 0x003a 080 080 000 Old_age Always - 20 190 Airflow_Temperature_Cel 0x0022 068 059 045 Old_age Always - 32 (Min/Max 25/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 63 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1998 194 Temperature_Celsius 0x0022 032 041 000 Old_age Always - 32 (0 23 0 0 0) 197 Current_Pending_Sector 0x0012 088 088 000 Old_age Always - 1976 198 Offline_Uncorrectable 0x0010 088 088 000 Old_age Offline - 1976 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4249h+18m+05.512s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 23082817897 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 119136936276 SMART Error Log Version: 1 ATA Error Count: 93 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 93 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 48 a8 51 00 Error: UNC at LBA = 0x0051a848 = 5351496 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 a3 51 e0 00 01:06:56.390 READ DMA EXT 25 00 00 e0 a2 51 e0 00 01:06:56.383 READ DMA EXT 35 00 00 20 56 82 e5 00 01:06:56.381 WRITE DMA EXT 35 00 00 20 55 82 e5 00 01:06:56.380 WRITE DMA EXT 35 00 00 20 54 82 e5 00 01:06:56.380 WRITE DMA EXT Error 92 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 48 a8 51 00 Error: UNC at LBA = 0x0051a848 = 5351496 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 a3 51 e0 00 01:06:10.632 READ DMA EXT 25 00 00 e0 a2 51 e0 00 01:06:10.619 READ DMA EXT 35 00 00 28 c0 5f e5 00 01:06:10.617 WRITE DMA EXT 35 00 00 28 bf 5f e5 00 01:06:10.617 WRITE DMA EXT 35 00 00 28 be 5f e5 00 01:06:10.616 WRITE DMA EXT Error 91 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 48 a8 51 00 Error: UNC at LBA = 0x0051a848 = 5351496 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 a3 51 e0 00 01:05:16.347 READ DMA EXT 25 00 00 e0 a2 51 e0 00 01:05:16.330 READ DMA EXT 25 00 08 88 d3 62 e0 00 01:05:16.306 READ DMA EXT 25 00 08 d0 e2 62 e0 00 01:05:16.296 READ DMA EXT 35 00 00 e8 5b f0 e4 00 01:05:16.295 WRITE DMA EXT Error 90 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 48 a8 51 00 Error: UNC at LBA = 0x0051a848 = 5351496 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 a3 51 e0 00 01:02:46.860 READ DMA EXT 25 00 00 e0 a2 51 e0 00 01:02:46.854 READ DMA EXT 35 00 08 98 c4 62 e0 00 01:02:46.853 WRITE DMA EXT 35 00 08 b8 e1 bd e0 00 01:02:46.853 WRITE DMA EXT 25 00 08 08 df 62 e0 00 01:02:46.845 READ DMA EXT Error 89 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 48 a8 51 00 Error: UNC at LBA = 0x0051a848 = 5351496 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 a3 51 e0 00 01:01:11.401 READ DMA EXT 25 00 00 e0 a2 51 e0 00 01:01:11.395 READ DMA EXT 25 00 08 e8 f5 61 e0 00 01:01:11.389 READ DMA EXT 25 00 20 80 3c 30 e0 00 01:01:11.363 READ DMA EXT 25 00 20 60 31 30 e0 00 01:01:11.353 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 4222 1371128392 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.