comando clima no hipath 4000

[unify971]

Prezado 

 tem alguma receita de como aplicar o comando clima no hipath 4000

[marcosaurelio]

Boa tarde no manual de Features Usage tem alguns exemplos de uso, quais dpln usar 

 

segue exemplo

 

HiPath 4000 V5, Section 3 - Feature Usage Examples, Service Documentation, Service Documentation

112.5 Generation

• Reserve dialplans 770 for DDI table and 771-789 for CLI tables

ADDLDPLN:LCRCONF=LCRADM,DPLNUM=770,LWMPOOL=8,DIALPLAN=0,INFO="DD I TABLE";
ADDLDPLN:LCRCONF=LCRADM,DPLNUM=771,LWMPOOL=8,DIALPLAN=1,INFO="CL I TABLE1";
ADDLDPLN:LCRCONF=LCRADM,DPLNUM=772,LWMPOOL=8,DIALPLAN=2,INFO="CL I TABLE2";

• Reserve special LCR dialingplan entries

ADD-DIMSU:LDPLN8=1000;

• Create DDI table entries
ADD-CLIMA:TABLE=DDI,DDIDP="12001",PLAN=1; ADD-CLIMA:TABLE=DDI,DDIDP="12002",PLAN=2; ADD-CLIMA:TABLE=DDI,DDIDP="12003",PLAN=2;

• Create CLI table entries
ADD-CLIMA:TABLE=CLI,PLAN=1,CLIDP="4930640014001", NAME="ANL91-1",NUMBER=28814001,ACTION=ACCEPT;

ADD-CLIMA:TABLE=CLI,PLAN=2,CLIDP="4930640014002", NAME="ANL91-2",NUMBER=8814002,DESTIDX=1,ACTION=RESTRICT; ADD-CLIMA:TABLE=CLI,PLAN=1,CLIDP="4930640014000", NAME="ANL91-3",NUMBER=8814000,ACTION=ACCEPT; ADD-CLIMA:TABLE=CLI,PLAN=2,CLIDP="4930640014003", NAME="ANL91-4",NUMBER=8814003,ACTION=REJECT;
ADD-CLIMA:TABLE=CLI,PLAN=1,CLIDP="49307100X",NAME="ANLX46 ACCEPT",ACTION=ACCEPT;

• Assign e.g. several COTs for incoming CO trunk
CHANGECOT:COTNO=60,COTTYPE=COTADD,PAR=R277&R278&R279&R282&R284;