Ir ao conteúdo
  • Comunicados

    • Gabriel Torres

      Seja um moderador do Clube do Hardware!   12-02-2016

      Prezados membros do Clube do Hardware, Está aberto o processo de seleção de novos moderadores para diversos setores ou áreas do Clube do Hardware. Os requisitos são:   Pelo menos 500 posts e um ano de cadastro; Boa frequência de participação; Ser respeitoso, cordial e educado com os demais membros; Ter bom nível de português; Ter razoável conhecimento da área em que pretende atuar; Saber trabalhar em equipe (com os moderadores, coordenadores e administradores).   Os interessados deverão enviar uma mensagem privada para o usuário @Equipe Clube do Hardware com o título "Candidato a moderador". A mensagem deverá conter respostas às perguntas abaixo:   Qual o seu nome completo? Qual sua data de nascimento? Qual sua formação/profissão? Já atuou como moderador em algo outro fórum, se sim, qual? De forma sucinta, explique o porquê de querer ser moderador do fórum e conte-nos um pouco sobre você.   OBS: Não se trata de função remunerada. Todos que fazem parte do staff são voluntários.
Entre para seguir isso  
brunofunny

Problema SCSI, Dispositivos não aparecem no /dev

Recommended Posts

Olá pessoal,

é o seguinte, a placa scsi anterior que eu tenho nesse servidor estava dando problema e foi trocada por uma do mesmo modelo "Adaptec AHA-2940U2/U2W / 7890/7891", só que quando iniciei a maquina, essa rodando Red Hat 9 (Shrike), ele não me disponibilizou os despositivos na pasta /dev, o que poderia ser ? Sendo que a placa é identica a outra, mesmo modelo etc..etc...

Detalhe esse é um servidor que possui um disco scsi de 1000GB e uma placa controladora SCSI/PCI essa placa que eu estou com problema.

abaixo seguem alguns dados:

########### LSPCI

[root@server config]# lspci

00:00.0 Host bridge: ServerWorks CMIC-HE (rev 22)

00:00.1 Host bridge: ServerWorks CMIC-HE

00:00.2 Host bridge: ServerWorks CMIC-HE

00:00.3 Host bridge: ServerWorks CMIC-HE

00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)

00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01)

00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)

00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)

00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)

00:0f.3 ISA bridge: ServerWorks GCLE Host Bridge

00:10.0 Host bridge: ServerWorks CIOB30 (rev 03)

00:10.2 Host bridge: ServerWorks CIOB30 (rev 03)

00:11.0 Host bridge: ServerWorks CIOB30 (rev 03)

00:11.2 Host bridge: ServerWorks CIOB30 (rev 03)

01:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet (rev 14)

01:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01)

01:08.1 RAID bus controller: Dell Computer Corporation PowerEdge Expandable RAID Controller 3 (rev 01)

02:06.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)

02:06.1 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)

03:08.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)

03:08.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)

########### DMESG

0 0 0 0 0 0 00

0c 0FF 0F 0 0 0 0 0 1 1 79

0d 000 00 1 0 0 0 0 0 0 00

0e 0FF 0F 0 0 0 0 0 1 1 81

0f 0FF 0F 0 0 0 0 0 1 1 89

IO APIC #3......

.... register #00: 03000000

....... : physical APIC id: 03

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 03000000

....... : arbitration: 03

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 0FF 0F 1 1 0 1 0 1 1 91

01 0FF 0F 1 1 0 1 0 1 1 99

02 0FF 0F 1 1 0 1 0 1 1 A1

03 0FF 0F 1 1 0 1 0 1 1 A9

04 0FF 0F 1 1 0 1 0 1 1 B1

05 0FF 0F 1 1 0 1 0 1 1 B9

06 0FF 0F 1 1 0 1 0 1 1 C1

07 0FF 0F 1 1 0 1 0 1 1 C9

08 0FF 0F 1 1 0 1 0 1 1 D1

09 0FF 0F 1 1 0 1 0 1 1 D9

0a 0FF 0F 1 1 0 1 0 1 1 E1

0b 0FF 0F 1 1 0 1 0 1 1 E9

0c 0FF 0F 1 1 0 1 0 1 1 32

0d 0FF 0F 1 1 0 1 0 1 1 3A

0e 0FF 0F 1 1 0 1 0 1 1 42

0f 0FF 0F 1 1 0 1 0 1 1 4A

IO APIC #4......

.... register #00: 04000000

....... : physical APIC id: 04

.... register #01: 000F0011

....... : max redirection entries: 000F

....... : PRQ implemented: 0

....... : IO APIC version: 0011

.... register #02: 04000000

....... : arbitration: 04

.... IRQ redirection table:

NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

00 0FF 0F 1 1 0 1 0 1 1 52

01 0FF 0F 1 1 0 1 0 1 1 5A

02 0FF 0F 1 1 0 1 0 1 1 62

03 0FF 0F 1 1 0 1 0 1 1 6A

04 0FF 0F 1 1 0 1 0 1 1 72

05 0FF 0F 1 1 0 1 0 1 1 7A

06 0FF 0F 1 1 0 1 0 1 1 82

07 0FF 0F 1 1 0 1 0 1 1 8A

08 0FF 0F 1 1 0 1 0 1 1 92

09 0FF 0F 1 1 0 1 0 1 1 9A

0a 0FF 0F 1 1 0 1 0 1 1 A2

0b 0FF 0F 1 1 0 1 0 1 1 AA

0c 0FF 0F 1 1 0 1 0 1 1 B2

0d 0FF 0F 1 1 0 1 0 1 1 BA

0e 0FF 0F 1 1 0 1 0 1 1 C2

0f 000 00 1 0 0 0 0 0 0 00

IRQ to pin mappings:

IRQ0 -> 0:0

IRQ1 -> 0:1

IRQ3 -> 0:3

IRQ4 -> 0:4

IRQ5 -> 0:5

IRQ6 -> 0:6

IRQ7 -> 0:7

IRQ8 -> 0:8

IRQ9 -> 0:9

IRQ12 -> 0:12

IRQ14 -> 0:14

IRQ15 -> 0:15

IRQ16 -> 1:0

IRQ17 -> 1:1

IRQ18 -> 1:2

IRQ19 -> 1:3

IRQ20 -> 1:4

IRQ21 -> 1:5

IRQ22 -> 1:6

IRQ23 -> 1:7

IRQ24 -> 1:8

IRQ25 -> 1:9

IRQ26 -> 1:10

IRQ27 -> 1:11

IRQ28 -> 1:12

IRQ29 -> 1:13

IRQ30 -> 1:14

IRQ31 -> 1:15

IRQ32 -> 2:0

IRQ33 -> 2:1

IRQ34 -> 2:2

IRQ35 -> 2:3

IRQ36 -> 2:4

IRQ37 -> 2:5

IRQ38 -> 2:6

IRQ39 -> 2:7

IRQ40 -> 2:8

IRQ41 -> 2:9

IRQ42 -> 2:10

IRQ43 -> 2:11

IRQ44 -> 2:12

IRQ45 -> 2:13

IRQ46 -> 2:14

.................................... done.

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 2392.2850 MHz.

..... host bus clock speed is 99.6784 MHz.

cpu: 0, clocks: 996784, slice: 332261

CPU0<T0:996784,T1:664512,D:11,S:332261,C:996784>

cpu: 1, clocks: 996784, slice: 332261

CPU1<T0:996784,T1:332256,D:6,S:332261,C:996784>

checking TSC synchronization across CPUs: passed.

Starting migration thread for cpu 0

smp_num_cpus: 2.

Starting migration thread for cpu 1

PCI: PCI BIOS revision 2.10 entry at 0xfc62e, last bus=13

PCI: Using configuration type 1

PCI: Probing PCI hardware

PCI: Ignoring BAR0-3 of IDE controller 00:0f.1

PCI: Discovered primary peer bus 01 [iRQ]

PCI: Discovered primary peer bus 03 [iRQ]

PCI: Discovered primary peer bus 08 [iRQ]

PCI: Discovered primary peer bus 0d [iRQ]

PCI: Using IRQ router ServerWorks [1166/0201] at 00:0f.0

PCI->APIC IRQ transform: (B0,I4,P0) -> 19

PCI->APIC IRQ transform: (B0,I6,P0) -> 18

PCI->APIC IRQ transform: (B1,I6,P0) -> 22

PCI->APIC IRQ transform: (B1,I8,P0) -> 20

PCI->APIC IRQ transform: (B2,I6,P0) -> 20

PCI->APIC IRQ transform: (B2,I6,P1) -> 21

PCI->APIC IRQ transform: (B3,I8,P0) -> 23

PCI->APIC IRQ transform: (B3,I8,P1) -> 24

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

apm: BIOS not found.

Starting kswapd

allocated 32 pages and 32 bhs reserved for the highmem bounces

VFS: Disk quotas vdquot_6.5.1

pty: 2048 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled

ttyS0 at 0x03f8 (irq = 4) is a 16550A

ttyS1 at 0x02f8 (irq = 3) is a 16550A

Real Time Clock Driver v1.10e

Floppy drive(s): fd0 is 1.44M

FDC 0 is a National Semiconductor PC87306

NET4: Frame Diverter 0.46

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

SvrWks CSB5: IDE controller at PCI slot 00:0f.1

SvrWks CSB5: chipset revision 147

SvrWks CSB5: not 100% native mode: will probe irqs later

SvrWks CSB5: simplex device: DMA forced

ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio

SvrWks CSB5: simplex device: DMA forced

ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA

hda: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide-floppy driver 0.99.newide

ide-floppy driver 0.99.newide

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 8192 buckets, 64Kbytes

TCP: Hash tables configured (established 262144 bind 65536)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

RAMDISK: Compressed image found at block 0

Freeing initrd memory: 294k freed

VFS: Mounted root (ext2 filesystem).

SCSI subsystem driver Revision: 1.00

Uhhuh. NMI received. Dazed and confused, but trying to continue

You probably have a hardware problem with your RAM chips

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec aic7890/91 Ultra2 SCSI adapter>

aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

blk: queue f7fd0a18, I/O limit 4095Mb (mask 0xffffffff)

Red Hat/Adaptec aacraid driver, Mar 13 2003

AAC0: kernel 2.7.4 build 3170

AAC0: monitor 2.7.4 build 3170

AAC0: bios 2.7.0 build 3170

AAC0: serial 0bcb461d3

scsi3 : percraid

Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0

Type: Direct-Access ANSI SCSI revision: 02

Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0

SCSI device sda: 2293731328 512-byte hdwr sectors (1174390 MB)

sda: Write Protect is off

Partition check:

sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >

Journalled Block Device driver loaded

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Freeing unused kernel memory: 156k freed

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

usb-ohci.c: USB OHCI at membase 0xf88a3000, IRQ 5

usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

usb.c: registered new driver hiddev

usb.c: registered new driver hid

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>

hid-core.c: USB HID support drivers

mice: PS/2 mouse device common for all mice

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal

Adding Swap: 2096440k swap-space (priority -1)

Adding Swap: 7992k swap-space (priority -2)

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,9), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,8), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

kjournald starting. Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,12), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3-fs warning: maximal mount count reached, running e2fsck is recommended

EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,13), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended

ext3: No journal on filesystem on sd(8,15)

ide-floppy driver 0.99.newide

hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.12

hda: DMA disabled

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]

parport0: irq 7 detected

ip_tables: © 2000-2002 Netfilter core team

Intel® PRO/100 Network Driver - version 2.1.29-k2

Copyright © 2002 Intel Corporation

e100: selftest OK.

divert: allocating divert_blk for eth0

e100: eth0: Intel® 8255x Based Network Connection

Hardware receive checksums enabled

cpu cycle saver enabled

ip_tables: © 2000-2002 Netfilter core team

tg3.c:v1.4c (Feb 18, 2003)

divert: allocating divert_blk for eth1

eth1: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5401)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:db:ac:f4:60

ip_tables: © 2000-2002 Netfilter core team

tg3: eth1: Link is up at 100 Mbps, full duplex.

tg3: eth1: Flow control is off for TX and off for RX.

ext3: No journal on filesystem on sd(8,15)

ip_tables: © 2000-2002 Netfilter core team

Installing knfsd (copyright © 1996 okir@monad.swb.de).

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]

parport0: irq 7 detected

lp0: using parport0 (polling).

lp0: console ready

cdrom: This disc doesn't have any tracks I recognize!

cdrom: This disc doesn't have any tracks I recognize!

application bug: caloggerd(3518) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

ext3: No journal on filesystem on sd(8,15)

application bug: caloggerd(4060) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

aacraid:Battery charge is now OK

ext3: No journal on filesystem on sd(8,15)

application bug: caloggerd(5420) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

application bug: cacommd(17697) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

application bug: cacommd(18183) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

application bug: cacommd(18360) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

scsi : 1 host left.

PCI: Enabling device 00:06.0 (0116 -> 0117)

PCI: Enabling device 03:08.0 (0116 -> 0117)

PCI: Enabling device 03:08.1 (0116 -> 0117)

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec aic7890/91 Ultra2 SCSI adapter>

aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

blk: queue f646f218, I/O limit 4095Mb (mask 0xffffffff)

Vendor: QUANTUM Model: SDLT320 Rev: 4646

Type: Sequential-Access ANSI SCSI revision: 02

blk: queue f646f418, I/O limit 4095Mb (mask 0xffffffff)

Vendor: QUANTUM Model: SDLT320 Rev: 5252

Type: Sequential-Access ANSI SCSI revision: 02

blk: queue ec663218, I/O limit 4095Mb (mask 0xffffffff)

Vendor: DELL Model: PV-132T Rev: 200D

Type: Medium Changer ANSI SCSI revision: 02

blk: queue f7969418, I/O limit 4095Mb (mask 0xffffffff)

Attached scsi generic sg3 at scsi2, channel 0, id 4, lun 0, type 8

scsi : 1 host left.

PCI: Enabling device 00:06.0 (0116 -> 0117)

PCI: Enabling device 03:08.0 (0116 -> 0117)

PCI: Enabling device 03:08.1 (0116 -> 0117)

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec aic7890/91 Ultra2 SCSI adapter>

aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8

<Adaptec 3960D Ultra160 SCSI adapter>

aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs

blk: queue f65ed818, I/O limit 4095Mb (mask 0xffffffff)

Vendor: QUANTUM Model: SDLT320 Rev: 4646

Type: Sequential-Access ANSI SCSI revision: 02

blk: queue f65ed018, I/O limit 4095Mb (mask 0xffffffff)

Vendor: QUANTUM Model: SDLT320 Rev: 5252

Type: Sequential-Access ANSI SCSI revision: 02

blk: queue f6fd3e18, I/O limit 4095Mb (mask 0xffffffff)

Vendor: DELL Model: PV-132T Rev: 200D

Type: Medium Changer ANSI SCSI revision: 02

blk: queue f71cce18, I/O limit 4095Mb (mask 0xffffffff)

Attached scsi generic sg3 at scsi2, channel 0, id 4, lun 0, type 8

application bug: cacommd(19986) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

scsi singledevice 2 0 1 1

blk: queue dc45d018, I/O limit 4095Mb (mask 0xffffffff)

(scsi2:A:1): 80.000MB/s transfers (40.000MHz, offset 62, 16bit)

scsi singledevice 2 0 2 1

(scsi2:A:2): 80.000MB/s transfers (40.000MHz, offset 62, 16bit)

scsi singledevice 2 0 4 1

application bug: cacommd(20206) has SIGCHLD set to SIG_IGN but calls wait().

(see the NOTES section of 'man 2 wait'). Workaround activated.

########### LSMOD

Module Size Used by Tainted: P

aic7xxx 142580 0

sr_mod 18168 0 (autoclean) (unused)

ide-tape 54096 0 (autoclean)

sg 37548 0 (autoclean)

esm 80756 1

parport_pc 19204 1 (autoclean)

lp 9188 0 (autoclean)

parport 39072 1 (autoclean) [parport_pc lp]

nfsd 81104 8 (autoclean)

iptable_filter 2412 0 (autoclean) (unused)

ip_tables 15864 1 [iptable_filter]

autofs 13684 0 (autoclean) (unused)

nfs 84600 13 (autoclean)

lockd 59536 1 (autoclean) [nfsd nfs]

sunrpc 87516 1 (autoclean) [nfsd nfs lockd]

tg3 52904 1

e100 62340 1

ide-cd 35772 0 (autoclean)

cdrom 34176 0 (autoclean) [sr_mod ide-cd]

keybdev 2976 0 (unused)

mousedev 5656 0 (unused)

hid 22308 0 (unused)

input 6208 0 [keybdev mousedev hid]

usb-ohci 22216 0 (unused)

usbcore 82592 1 [hid usb-ohci]

ext3 73376 8

jbd 56336 8 [ext3]

aacraid 32580 12

sd_mod 13452 24

scsi_mod 110488 5 [aic7xxx sr_mod sg aacraid sd_mod]

########### CAT /PROC/SCSI/SCSI

Attached devices:

Host: scsi2 Channel: 00 Id: 01 Lun: 00

Vendor: QUANTUM Model: SDLT320 Rev: 4646

Type: Sequential-Access ANSI SCSI revision: 02

Host: scsi2 Channel: 00 Id: 02 Lun: 00

Vendor: QUANTUM Model: SDLT320 Rev: 5252

Type: Sequential-Access ANSI SCSI revision: 02

Host: scsi2 Channel: 00 Id: 04 Lun: 00

Vendor: DELL Model: PV-132T Rev: 200D

Type: Medium Changer ANSI SCSI revision: 02

Host: scsi3 Channel: 00 Id: 00 Lun: 00

Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0

Type: Direct-Access ANSI SCSI revision: 02

Bem acho que isso é o suficiente, já tentei varias coisas como carregar e descarregar o modulo aic7xxx com rmmod e insmod por isso o dmesg mostra varios logs de SCSI's

Qualquer ajuda agradeço,

[]'s

Compartilhar este post


Link para o post
Compartilhar em outros sites

Crie uma conta ou entre para comentar

Você precisar ser um membro para fazer um comentário

Entre para seguir isso  





Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas publicações sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×