Ir ao conteúdo
  • Cadastre-se

Como entrar no setup da bios no toshiba satellite 4080xcdt?


Alyson

Posts recomendados

aí galera, seguinte... preciso da ajuda de vocês, pois to com um notebook toshiba satellite 4080xcdt e o hd foi p/ pau, já consegui outro...só que eu não consigo de jeito nenhum entrar no setup da bios, p/ alterar o boot dele...alguem sabe como entrar no setup??

já procurei em varios lugares, e a maioria diz p/ eu apertar o f1 outros o esc, nada da certo.

Valeu.

Link para o comentário
Compartilhar em outros sites

F2 pra entra já tento? pode se dizer que é a tecla universal pra entra na bios, poucos computadores e nots vem com outra tecla se não for ela tenta F11, se não der tambem vai apertando todos os Fn° que tive até entra! =)

falou!

Esqueci de dizer, tu tem que fazer isso na hora que ele estiver contando a quantidade de memoria, depois de uns 5-6 segundos de ligado, ai já começa a aperta aperta umas 2 vezes cada tecla pra te certeza!

Link para o comentário
Compartilhar em outros sites

Esta tudo aqui.. bem explicadinho...

Support Bulletins

BIOS Setup / BIOS settings -- access instructions

Document ID: 98081013

Posted Date: 03/01/04

Last Updated: 05/02/06

Operating System: N/A

Category: BIOS

Distribution: Public

Applicable Models: Portege All

Satellite All

Satellite Pro All

TE-Series TE2000

Tecra All

libretto All

Use of any software made available for download from this system constitutes your acceptance of the Export Control Terms and the terms in the Toshiba end-user license agreement both of which you can view before downloading any such software.

Information solution survey

This bulletin documents the several different methods for gaining access to the BIOS Setup feature of most models of Toshiba computers. These setting are stored in non-volatile CMOS memory, hence the alternative term "CMOS Setup". The settings are managed by a utility program built into the computer's BIOS (Basic Input/Output System).

For Toshiba desktop PCs and servers : Press and hold the F2 key immediately after turning the computer on (during the Power-on Self Test (POST)).

For Toshiba notebook PCs manufactured since the introduction of Windows XP, one or more of the following methods will be effective:

Toshiba Hardware utility method: Run the Toshiba Hardware utility from the Toshiba Console. It may also accessible (as 'HWSetup') from the Windows Control Panel. Changes to some of the settings will require re-starting the computer. This method is the only way to access the BIOS settings on some notebook PCs (Satellite 5000 series, for example). (For these machines, pressing and holding the F12 key immediately after powering-on the notebook will allow you to alter the notebook's boot priority.)

If the Toshiba Hardware utility is not present, try the F2 key method and the Esc key method (see below). The Toshiba Hardware utility may be downloaded from the Toshiba support website at http://support.toshiba.com

If the computer is fully off, and/or to avoid having to re-start it (and Windows), use one or the other of the following two methods. The PC will have to be truly off (not suspended, or in standby mode, or in hibernation mode). If an external keyboard is attached to the notebook (either directly or via a docking station or a port-replicator), disconnect it until you have completed this procedure.

F2 key method: Turn the computer on. If you see an invitation to press the F2 key to enter Setup, do so. The Setup screen will appear.

Esc key method: Turn the computer on. If you do not see a prompt to press the F2 key, then immediately press and hold the Esc key for three seconds, and then release it. When prompted to, press the F1 key. The Setup screen will appear.

For Toshiba notebook PCs manufactured before the introduction of Windows XP, one or more of the following methods are appropriate:

HWSetup method: Run the HWSetup utility from the Windows Control Panel. This utility provides a relatively user-friendly way to change the BIOS settings. Changes to some of the settings will require re-starting the PC (and Windows). HWSetup was pre-installed on all but early Toshiba notebook models. If it doesn't appear as a Control Panel applet on your computer, you may be able to download it from the Toshiba Support website as part of the Toshiba Utilities package for your model.

Esc key method: If an external keyboard is attached to the notebook, either directly or via a docking station or a port-replicator, disconnect it. Turn the computer on. Immediately press and hold the Esc key for three seconds, and then release it. When prompted to, press the F1 key. The Setup screen will appear. The PC will have to be truly off (not suspended, or in standby mode, or in hibernation mode) for this method to work.

TSETUP method: Run the TSETUP utility, under MS-DOS. TSETUP runs correctly only when executed from a 'native' MS-DOS prompt, and with the processor running in real mode -- so not from a Windows 'DOS box', and without any memory manager software running (EMM386.EXE, HIMEM.SYS, or QEMM386.EXE, for example). TSetup was pre-installed on most early Toshiba notebook models (except for the very earliest models). It is available from the Toshiba Support website.

- km/wa

Valeu/????

Link para o comentário
Compartilhar em outros sites

  • 8 meses depois...
  • 2 anos depois...

Arquivado

Este tópico foi arquivado e está fechado para novas respostas.

Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas comunidades sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×
×
  • Criar novo...