Como habilitar Sata Native Mode Rodando Win xp?

[Magua]

Estou tentando instalar o quickplay num pavillion dv 6000, mas ele só roda com o native mode habilitado, alguém poderia me ajudar explicando como habilito esta função rodando win xp.

[icefly]

Esse ajuste é feito vi setup (BIOS); acesse o setup do sua maquina e procure por parâmetros com nome de Sata ou AHCI.

[jorgeelmagnifico]

(Respondo 3anos depois, mas pode servir para outros usuarios novatos)

voce precisa habilitar o Sata Native Mode depis de te-lo desabilitado para instalar o win XP. Para isso segue estas instruções (em inglês:D)

ENABLING SATA NATIVE MODE AFTER XP INSTALL

1.Download the Intel Matrix Storage Manager software for your computer from the manufacturer's web site

2.Run it, by default it will save some files to C:\ before it runs setup and tells you that the software is not supported (alternatively you can uncompress the files to a temporary folder with a compression software like 7-Zip)

3.Now open up a command prompt, go to the folder where the files were extracted and run the following command to extract the driver files: "setup -A -P"path of the extracted files" (without the quotes and there may be a space or not between -P and the path, depending on your version of the driver)

4.Accept the license agreement, it extracts some files. The files you're interested in are now in a "Driver" subfolder of the original folder and include the following :iaahci.cat, iaahci.inf, iastor.cat, iastor.inf, iastor.sys, TXTSSETUP.OEM

5.Now go to Device Manager, under IDE ATA/ATAPI controllers you should see something like : Intel 82801GBM (ICH7-M Family) Serial ATA Storage Controller

6.Right-Click on that and select Update Driver

7.Say no to connecting to Windows Update to search, hit Next

8.Select Install from a list or specific location (Advanced), hit Next

9.Select "Don't search. I will choose the driver to install", hit Next

10.Select Have Disk

11.Browse to the Driver folder and highlight the iastor.inf file, hit Open

12.Select OK

13.Now you should have a list of controllers. **WARNING** Selecting the wrong controller for your computer will prevent it to boot, causing BSOD. Make sure you select the right controller for your particular computer ! See this thread on HP forums for the controller inside some laptops: http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-Compaq-Slate/Enabling-SATA-Native-Mode-after-XP-Install/m-p/695231/highlight/true#M104270

14.You'll get warned that installing the device driver is not recommended, click Yes to continue installing

15.Click Finish

16.Click Yes to restart your computer

17.When your computer boots up, you need to to enter the BIOS. Change SATA Native Mode to Enabled, save changes and exit.

18.After you log into Windows, your computer will find the "new" hardware. Wait until you get the popup message to restart your computer, say Yes to restart one last time.

I wope thats worked