Ir ao conteúdo
  • Comunicados

    • Gabriel Torres

      Seja um moderador do Clube do Hardware!   12-02-2016

      Prezados membros do Clube do Hardware, Está aberto o processo de seleção de novos moderadores para diversos setores ou áreas do Clube do Hardware. Os requisitos são:   Pelo menos 500 posts e um ano de cadastro; Boa frequência de participação; Ser respeitoso, cordial e educado com os demais membros; Ter bom nível de português; Ter razoável conhecimento da área em que pretende atuar; Saber trabalhar em equipe (com os moderadores, coordenadores e administradores).   Os interessados deverão enviar uma mensagem privada para o usuário @Equipe Clube do Hardware com o título "Candidato a moderador". A mensagem deverá conter respostas às perguntas abaixo:   Qual o seu nome completo? Qual sua data de nascimento? Qual sua formação/profissão? Já atuou como moderador em algo outro fórum, se sim, qual? De forma sucinta, explique o porquê de querer ser moderador do fórum e conte-nos um pouco sobre você.   OBS: Não se trata de função remunerada. Todos que fazem parte do staff são voluntários.
Entre para seguir isso  
Emersonrick

[Resolvido] Problemas com o "Índice de experiência do Windows!"

Recommended Posts

Boa noite nobres companheiros. Preciso de uma orientação sobre o Índice de experiência do Windos! Já faz um bom tempo que não faço a avaliação do meu sistema, na verdade já formatei meu PC várias vezes e nem me lembrava dela, porém essa semana por motivos de testes, executei a formatação e nas duas vezes quando estou avaliando meu sistema, antes de terminar aparece uma mensagem informando que a ferramenta parou de funcionar. Fiz tudo como manda o figurino, ativei, baixei e instalei as atualizações,drivers da placa mãe,enfim, meu PC está zero bala funcionando 100%, não trava, nem um erro sequer aparece, porém estou perdido sobre esse problema.Em todas as tentativas,cliquei em procurar uma solução online,mas em nenhuma delas funcionou. Na imagem mostra exatamente a janela com o problema descrito.Como a janela não maximiza, fiz uma pequena edição de forma que os detalhes do erro fiquem numa só coluna.Ficarei grato a quem puder me ajudar entender o que pode estar acontecendo.Obrigado!

Editado por Emersonrick

Compartilhar este post


Link para o post
Compartilhar em outros sites
Up..!! Nenhuma sugestão?

Clique no Iniciar » Executar(se não houver, pressione tecla Windows+R) e digite;

eventvwr.exe

No Console de Eventos, clique em Logs do Windows;

Nas opções Aplicativos e Sistema, em ambos pressione botão direito e Limpar Log. Após este procedimento, volte a executar o Índice de Experiência, se apresentar novamente o erro, volte no console de eventos e post aqui os eventos criados.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Fiz o procedimento que você orientou,apaguei os logs e executei a avaliação. Mas na metade da avaliação a ferramenta para e aparece a mesma mensagem de erro que postei. Então agora estou postando os logs como me pediu.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Douglas, fiz um "print screen" exatamente no ponto onde a ferramenta de avaliação para de responder e abre a janela de erro, mas só que na hora de enviar a imagem, aparece que eu excedí o limite e não consigo postar a nova imagem, o que faço?

Compartilhar este post


Link para o post
Compartilhar em outros sites

Clique novamente no Iniciar » Execute e digite abaixo;

%homedrive%\Windows\Performance\WinSAT\DataStore

Dentro do diretório DataStore, apague todos os arquivos e restarte a estação, depois volte a executar o Índice de Experiência.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Fiz tudo direitinho mas nada ainda, a ferramenta para bem no meio..! Eu queria postar a imagem de onde para pra você ver mas no "gerenciar imagens e arquivos" diz que estou excedendo o limite e na barra acima está quase toda vermelha com 1,91 mb de anexos.

Compartilhar este post


Link para o post
Compartilhar em outros sites
Fiz tudo direitinho mas nada ainda, a ferramenta para bem no meio..! Eu queria postar a imagem de onde para pra você ver mas no "gerenciar imagens e arquivos" diz que estou excedendo o limite e na barra acima está quase toda vermelha com 1,91 mb de anexos.

Você pode limpar a lista de anexos, Vá em Painel de Controle nas opções Diversos, clique em Anexos. Veja imagem abaixo;

post-19153-13884960842057_thumb.jpg

Editado por Douglas

Compartilhar este post


Link para o post
Compartilhar em outros sites

Essa imagem é exatamente a que aparece quando dá o erro: Bem no momento que está "Ajustando a decodificação do Windows Media", a barra de progresso avança um bom pedaço e daí abre a janela de erro.

post-736672-13884960843251_thumb.jpg

Editado por Emersonrick

Compartilhar este post


Link para o post
Compartilhar em outros sites
Essa imagem é exatamente a que aparece quando dá o erro: Bem no momento que está "Ajustando a decodificação do Windows Media", a barra de progresso avança um bom pedaço e daí abre a janela de erro.

Nesta mesma janela que você postou o print, desça com a barra até a opção Módulos com Falha e tire outro print e poste aqui. ;)

Compartilhar este post


Link para o post
Compartilhar em outros sites

Minha placa de vídeo é on-board 256mb e meu sistema é x86 Ultimate. Só pra acrescentar eu já tinha feito índice de experiencia inclusive postei aqui no site.

post-736672-13884960844212_thumb.jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites

Justo agora que eu mais preciso pois semana que vem vou comprar uma placa de vídeo off-board e precisarei saber no que irá melhorar meu índice.Da última vez que fiz deu nota de "2,0" justamente por causa dos elementos gráficos.Minha máquina funciona muito bem,leve,sem erros ou travamento.

Acesse o site abaixo;

http://www.dll-files.com/dllindex/dll-files.shtml?kernelbase

Clique em Download File e salve na área de trabalho, depois descompacte o mesmo e mova o arquivo .DLL para o diretório System32, substitua pelo o atual, reinicie a estação e veja se funciona.

OK, farei isso agora.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Tentei várias vezes substituir ou excluir o arquivo existente mas veja o que aparece, mesmo executando como administrador:

post-736672-13884960844594_thumb.jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites
Tentei várias vezes substituir ou excluir o arquivo existente mas veja o que aparece, mesmo executando como administrador:

Ok.

Abra o prompt de comando com privilégio elevado(como administrador), tenha em mãos a midia de instalação do Windows 7 e execute o comando abaixo;

sfc.exe /SCANFILE=C:\Windows\System32\KernelBase.dll

E veja se encontra alguma anormalidade no arquivo.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Fiz e apareceu o seguinte: "A Proteção de recursos do Windows não encontrou nenhuma violação de integridade".

Compartilhar este post


Link para o post
Compartilhar em outros sites

Vá até o diretório C:\Windows\Performance\WinSAT. Abra o arquivo winsat.log e poste aqui o conteúdo.

Compartilhar este post


Link para o post
Compartilhar em outros sites

038033 (0836) - winsat\logging.cpp:0815: --- START 2009\7\13 21:53:24 PM ---

038064 (0836) - winsat\main.cpp:4301: Command Line = "D:\Windows\system32\winsat.exe" moobe -cancelevent d8664637-bbd1-4343-8f97-96458fcd1015 -moobegoevent f6d21d93-fa3b-48ec-8c0b-2a438f4e6e9c

038079 (0836) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

038204 (0836) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=TRUE.

038267 (0836) - winsat\main.cpp:4585: Watch dog system enabled

038267 (0836) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds

038610 (0836) - winsat\main.cpp:2505: > DWM not running.

039936 (0836) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'

039951 (0836) - winsat\main.cpp:2793: > power policy saved.

040107 (0836) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

040123 (0836) - winsat\main.cpp:2814: > power policy set to maximum.

040591 (0836) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a

040591 (0836) - d3d\dx9misc.cpp:1030: Error: Unable to create the D3D device

040607 (0836) - d3d\dx9misc.cpp:1030: Error: Unable to check the capabilities of the video card because a d3d device could not be created

040825 (0836) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

040841 (0836) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE

040856 (0836) - winsat\main.cpp:1775: > Run Assessment features

041761 (0836) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

041964 (0836) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.

042385 (0836) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0

042401 (0836) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

042494 (0836) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0

042525 (0836) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability

042525 (0836) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0

042557 (0836) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE

042728 (0836) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability

042744 (0836) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0

042759 (0836) - common\winsatutilities.cpp:1382: cannot access the winast API registry key; 2 The system cannot find the file specified.

042900 (0836) - winsat\main.cpp:2339: > Finalized MOOBE key

042947 (0836) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'

042962 (0836) - winsat\main.cpp:2855: > Power state restored.

042978 (0836) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.

043087 (0836) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!

043103 (0836) - winsat\watchdog.cpp:0311: Watch dog system shutdown

043118 (0836) - winsat\main.cpp:4909: > exit value = 0.

057781 (0768) - winsat\logging.cpp:0815: --- START 2011\10\15 18:34:50 ---

057921 (0768) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" moobe -cancelevent 937ac47d-e331-4959-99d8-37ebd5a8c67c -moobegoevent 60d3617f-042a-4014-aa03-93621a5cec18

058046 (0768) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

058343 (0768) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=TRUE.

058437 (0768) - winsat\main.cpp:4585: Watch dog system enabled

058437 (0768) - winsat\main.cpp:4592: Main watch dog timer set to 60.0 seconds

059000 (0768) - winsat\main.cpp:2505: > DWM not running.

063843 (0768) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'

063843 (0768) - winsat\main.cpp:2793: > power policy saved.

064000 (0768) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

064000 (0768) - winsat\main.cpp:2814: > power policy set to maximum.

064296 (0768) - d3d\dx9misc.cpp:1030: HRESULT = 8876086a

064296 (0768) - d3d\dx9misc.cpp:1030: Erro: não é possível criar o dispositivo D3D

064296 (0768) - d3d\dx9misc.cpp:1030: Erro: não é possível verificar os recursos da placa de vídeo porque não foi possível criar um dispositivo D3D

064328 (0768) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

064328 (0768) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE

064343 (0768) - winsat\main.cpp:1775: > Run Assessment features

065671 (0768) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

066328 (0768) - d3d\graphicsop.cpp:0263: Driver is not WDDM; aborting assessment.

067203 (0768) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0

067203 (0768) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

067328 (0768) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0

067328 (0768) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability

067328 (0768) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0

067343 (0768) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=TRUE RanOverTs=FALSE RanOnbatteries=FALSE

067687 (0768) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DX9 capability

067687 (0768) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0

067687 (0768) - common\winsatutilities.cpp:1388: The error count is zero becuase the TaskErrorCount value does not exist.

067750 (0768) - winsat\main.cpp:2339: > Finalized MOOBE key

067843 (0768) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 381b4222-f694-41f0-9685-ff5bb260df2e'

067859 (0768) - winsat\main.cpp:2855: > Power state restored.

067859 (0768) - winsat\main.cpp:2873: > Not necessary to reenable EMD cache.

067906 (0768) - winsat\main.cpp:2899: INFO: DwmpRestartComposition() did not return OK!

067953 (0768) - winsat\watchdog.cpp:0311: Watch dog system shutdown

067953 (0768) - winsat\main.cpp:4909: > exit value = 0.

157796 (3652) - winsat\logging.cpp:0815: --- START 2011\10\15 23:05:21 ---

157828 (3652) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 9ae9a53e-fb98-41ed-b133-a5ffad8070ed

157828 (3652) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

158375 (3652) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

158437 (3652) - winsat\main.cpp:4585: Watch dog system enabled

158437 (3652) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

160609 (3652) - winsat\main.cpp:2505: > DWM not running.

160609 (3652) - winsat\main.cpp:2470: > EMD service will be restored on exit.

160765 (3652) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '381b4222-f694-41f0-9685-ff5bb260df2e'

160765 (3652) - winsat\main.cpp:2793: > power policy saved.

161140 (3652) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

161140 (3652) - winsat\main.cpp:2814: > power policy set to maximum.

162687 (3652) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

162687 (3652) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

162687 (3652) - winsat\main.cpp:1775: > Run Assessment features

163359 (3652) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

191812 (3652) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 533076

191812 (3652) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

191812 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

206343 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

220203 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

256062 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

293234 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

293250 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293250 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

293250 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293250 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

293343 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293343 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

293375 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293375 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

293390 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293390 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

293390 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293390 (3652) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

293421 (3652) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

293421 (3652) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp

302531 (3652) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

477531 (4088) - winsat\logging.cpp:0815: --- START 2011\10\15 23:10:41 ---

477546 (4088) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 7fdbf97f-5e7d-44b9-8e05-e71fd48823d4

477546 (4088) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

478093 (4088) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

478140 (4088) - winsat\main.cpp:4585: Watch dog system enabled

478218 (4088) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

479109 (4088) - winsat\main.cpp:2505: > DWM not running.

479109 (4088) - winsat\main.cpp:2470: > EMD service will be restored on exit.

481562 (4088) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

481562 (4088) - winsat\main.cpp:2793: > power policy saved.

481890 (4088) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

481890 (4088) - winsat\main.cpp:2814: > power policy set to maximum.

483515 (4088) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

483515 (4088) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

483515 (4088) - winsat\main.cpp:1775: > Run Assessment features

484093 (4088) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

511812 (4088) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 508314

511859 (4088) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

511859 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

524218 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

538890 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

574343 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

610796 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

610843 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

610843 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

610875 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

610921 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

610937 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

610937 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

610984 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

611062 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

611078 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

611078 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

611078 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

611109 (4088) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

611125 (4088) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

611156 (4088) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp

618984 (4088) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

4716625 (3024) - winsat\logging.cpp:0815: --- START 2011\10\19 19:57:01 ---

4716656 (3024) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 6e5769e0-1ddf-454b-baec-b90d4cc4c3b2

4716656 (3024) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

4716765 (3024) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

4716812 (3024) - winsat\main.cpp:4585: Watch dog system enabled

4716812 (3024) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

4719890 (3024) - winsat\main.cpp:2490: > DWM Running.

4720531 (3024) - winsat\main.cpp:2497: > turning off DWM.

4720562 (3024) - winsat\main.cpp:2470: > EMD service will be restored on exit.

4722093 (3024) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

4722093 (3024) - winsat\main.cpp:2793: > power policy saved.

4722437 (3024) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

4722437 (3024) - winsat\main.cpp:2814: > power policy set to maximum.

4724140 (3024) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

4724140 (3024) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

4724140 (3024) - winsat\main.cpp:1775: > Run Assessment features

4725015 (3024) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

4752187 (3024) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 540647

4752187 (3024) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

4752187 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

4766250 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

4779984 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

4816453 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

4852609 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

4852625 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852625 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

4852625 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852625 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

4852640 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852640 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

4852640 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852640 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

4852671 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852671 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

4852687 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852687 (3024) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

4852687 (3024) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

4852687 (3024) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp

4860375 (3024) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

6335046 (1568) - winsat\logging.cpp:0815: --- START 2011\10\19 20:23:59 ---

6335062 (1568) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent e5ee83c4-2a63-40da-90a7-03a5515c4c17

6335062 (1568) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

6335187 (1568) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

6335234 (1568) - winsat\main.cpp:4585: Watch dog system enabled

6335234 (1568) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

6336171 (1568) - winsat\main.cpp:2490: > DWM Running.

6336687 (1568) - winsat\main.cpp:2497: > turning off DWM.

6336687 (1568) - winsat\main.cpp:2470: > EMD service will be restored on exit.

6344109 (1568) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

6344109 (1568) - winsat\main.cpp:2793: > power policy saved.

6344468 (1568) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

6344468 (1568) - winsat\main.cpp:2814: > power policy set to maximum.

6346343 (1568) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

6346343 (1568) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

6346343 (1568) - winsat\main.cpp:1775: > Run Assessment features

6347062 (1568) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

6373015 (1568) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 540292

6373015 (1568) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

6373015 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

6387281 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

6401140 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

6437000 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

6473468 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

6473500 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473500 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

6473515 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473515 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

6473515 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473515 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

6473546 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473546 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

6473562 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473562 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

6473562 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473562 (1568) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

6473593 (1568) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

6473609 (1568) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp

6481140 (1568) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

122250 (3708) - winsat\logging.cpp:0815: --- START 2011\10\19 20:42:16 ---

122250 (3708) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -cancelevent 577a7bd3-4778-451f-95b6-ed33e3042be8

122328 (3708) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured

122953 (3708) - winsat\main.cpp:4474: > IsFormal=TRUE IsMoobe=FALSE.

123015 (3708) - winsat\main.cpp:4585: Watch dog system enabled

123015 (3708) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds

126718 (3708) - winsat\main.cpp:2490: > DWM Running.

127218 (3708) - winsat\main.cpp:2497: > turning off DWM.

127312 (3708) - winsat\main.cpp:2470: > EMD service will be restored on exit.

132578 (3708) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

132578 (3708) - winsat\main.cpp:2793: > power policy saved.

132921 (3708) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

132921 (3708) - winsat\main.cpp:2814: > power policy set to maximum.

134546 (3708) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance

134546 (3708) - winsat\main.cpp:0948: > IsOfficial=TRUE IsFormal=TRUE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

134546 (3708) - winsat\main.cpp:1775: > Run Assessment features

135468 (3708) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock

159500 (3708) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0

159500 (3708) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS

159500 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

173390 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

187312 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

225656 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

264062 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

264078 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264078 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)

264078 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264078 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3

264109 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264109 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3

264109 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264125 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

264125 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264125 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1

264125 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264156 (3708) - winsat\main.cpp:1775: > Run Assessment d3d -dx10 -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6

264156 (3708) - d3d\graphicsop.cpp:0209: Driver is not WDDM 1.1; aborting DX10 assessment.

264171 (3708) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp

272953 (3708) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps

1884093 (3784) - winsat\main.cpp:2152: --- START 2011\10\19 21:11:38 ---

1884343 (3784) - winsat\main.cpp:1901: > DWM Running.

1884375 (3784) - winsat\main.cpp:1918: > leaving DWM on.

1884390 (3784) - mlib\syspowertools.cpp:0872: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

1884421 (3784) - winsat\main.cpp:1977: > power policy saved.

1884593 (3784) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

1884609 (3784) - winsat\main.cpp:1989: > power policy set to maximum.

1885437 (3784) - winsat\main.cpp:2601: > IsOfficial=FALSE IsFormal=FALSE IsMoobe=FALSE RanOverTs=FALSE RanOnbatteries=FALSE

1885500 (3784) - winsat\main.cpp:1160: > Running Assessment: features ''

1887046 (3784) - winsat\main.cpp:1442: > Assessment completed

1887453 (3784) - mlib\syspowertools.cpp:0904: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'

1887468 (3784) - winsat\main.cpp:2024: > Power state restored.

1887500 (3784) - winsat\main.cpp:3056: > exit value = 0.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Baixe o driver atual da sua VGA e instale;

VGA

Restarte novamente a estação e tente executar.

  • Curtir 1

Compartilhar este post


Link para o post
Compartilhar em outros sites

Douglas deu certo! Graças ao seu enorme apoio meu índice de experiência do Windows foi concluído.Parabéns pelo seu conhecimento e dedicação em ajudar.Obrigado amigo. Instalei o driver VGA atualizado que você recomendou e percebí que meu sistema ficou bem melhor. Você me ajudou a entender onde estava errando, na primeira vez que instalei o Windows 7, eu não instalei nenhum driver da placa mãe que vem com o PC, tudo foi o Windows que instalou automaticamente e dessas últimas vezes que formatei meu PC eu inseri o CD de drivers e mandei ver pra instalar todos.Como tudo funcionou perfeitamente e eu não liguei mais pro índice de experiência, não percebí que meus drivers estavam desatualizados e por esse motivo não entendia o porquê do índice não concluir.Mas com sua preciosa ajuda e perseverança , tudo deu certo e pra comprovar estou postando a imagem do resultado que pra minha surpresa onde antes era de "2,0", hoje está em "2,9".Obrigado Douglas e mais uma vez parabéns por esse conhecimento valioso que você possui e tem prazer em dividir conosco!

post-736672-13884960854055_thumb.jpg

Compartilhar este post


Link para o post
Compartilhar em outros sites

É realmente deu um trabalho até acharmos o problema, mas com a perseverança e dedicação conseguimos. ;)

Compartilhar este post


Link para o post
Compartilhar em outros sites

Caso o autor do tópico necessite, o mesmo será reaberto, para isso deverá entrar em contato com a moderação solicitando o desbloqueio.

Compartilhar este post


Link para o post
Compartilhar em outros sites
Visitante
Este tópico está impedido de receber novos posts.
Entre para seguir isso  





Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas publicações sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×