Ir ao conteúdo
  • Cadastre-se
Entre para seguir isso  
Guest eget

[Resolvido] Erro Na Instalação Do Windows 2000 Prof.

Recommended Posts

Guest eget

Troquei minha placa mãe por uma melhor, que era um Pentium 2 por um Pentium 3 o modelo da placa nova é DV6AA da ECS.

Se eu tento instalar com os conjunto de Disquetes o programa paralisa durante a instalação após carregar os disquetes.

Se eu instalo o Windows ME e tento atualizar diretamente com o Cd de instalação do Windows 2000 Prof. também da erro. de Kernel_Mode_Trap.

O que devo fazer?

Obrigado Pela Atenção

Guilherme.

Compartilhar este post


Link para o post
Compartilhar em outros sites

Vou tentar ajudar...

Este texto é do Resource Kit, no arquivo onde há todas as mensagens de erros do Windows.

Error Message:

UNEXPECTED_KERNEL_MODE_TRAP

Explanation:

This Stop message means that one of two types of problems occurred in kernel-mode, either the kind of condition that the kernel is not allowed to have or catch (a bound trap), or an unrecoverable error. Occasionally, this message can be caused by software problems, but the most common cause is hardware failure. It usually occurs after the installation of faulty or mismatched hardware (especially memory) or in the event that installed hardware fails. Setting the CPU to run at speeds above the rated specification (known as overclocking the CPU) can also cause this error.

User Action:

If hardware was recently added to the system, remove it to see if the error recurs. If existing hardware has failed, remove or replace the faulty component. Run hardware diagnostics supplied by the system manufacturer, especially the memory scanner, to determine which hardware component has failed. For details on these procedures, see the owner’s manual for your computer. Check that all network adapters in the computer are properly seated. Use an ink eraser or an electrical contact treatment, available at electronics supply stores, to ensure network adapter contacts are clean. If the error appears on a newly installed system, check the availability of updates for the following: firmware on RISC systems, as well as BIOS revisions on the motherboard, the SCSI controller, or network adapters. Updates of this kind are typically available on the web site or BBS of the hardware manufacturer. Confirm that all hard disks, hard disk controllers, and SCSI adapters are listed on the Microsoft Windows 2000 Hardware Compatibility List (HCL) on http://www.microsoft.com/. If the error occurred after the installation of a new or updated device driver, remove or replace the driver. If, under this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, start the computer using the Recovery Console in order to access the file. Restart your computer, and then press F8 at the character-mode menu that displays the operating system choices. At the resulting Windows 2000 Advanced Options menu, choose the Last Known Good Configuration option. This option is most effective when only one driver or service is added at a time. If the CPU was overclocked, return the CPU to the default clock speed setting. Check the System Log in Event Viewer for additional error messages that might help pinpoint the device or driver causing the error. Disabling memory caching of the BIOS might also resolve it. If you encountered this error while upgrading to Windows 2000, it might be caused by a device driver, a system service, a virus scanner, or a backup tool that is incompatible with the new version. If possible, remove all third-party device drivers and system services and disable any virus scanners prior to upgrading. Contact the software manufacturer to obtain updates of these tools. Finally, if all the above steps fail to resolve the error, take the system motherboard to a repair facility for diagnostic testing. A crack, a scratched trace, or a defective component on the motherboard can also cause this error. For more troubleshooting information about this Stop message, refer to the Microsoft Knowledge Base at http://support.microsoft.com/support.

************

Outra ocorrência:

Error Message:

STOP: 0x0000007F (parameter, parameter, parameter, parameter) UNEXPECTED_KERNEL_MODE_TRAP

Explanation:

This is a Windows 2000 Executive character-mode STOP message. It indicates that a trap occurred in kernel mode.

User Action:

If this is the first time you have booted after installing new hardware, remove the hardware and boot again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with Windows 2000. For information about the hardware, contact the supplier. If you are installing Windows 2000 for the first time, check the Windows 2000 system requirements, including the amount of RAM and disk space required to load the operating system. Also, check the Hardware Compatibility List to verify that the system can run Windows 2000. If Windows 2000 is loaded and no new hardware has been installed, reboot with recovery options set to create a dump file. If the message continues to appear, select the Last Known Good option when you reboot. If there is no Last Known Good configuration, try using the Emergency Repair Disk. If you do not have an Emergency Repair Disk, contact your technical support group.

******************************

No que informa, deve ser erro junto a sistemas com overclock, memória.

http://search.microsoft.com/search/results...MODE_TRAP&na=30

http://search.microsoft.com/search/results...MODE_TRAP&na=30

Abraço,

Celso

Compartilhar este post


Link para o post
Compartilhar em outros sites
Visitante
Este tópico está impedido de receber novos posts.
Entre para seguir isso  





Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas publicações sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×