Modem netodragon

[Visitante]

onde posso consegui o drive desse modem e como é q eu instalo esse drive no Linux Conectiva 9

[douglasgm]

de uma olhada e ve se te ajuda:

http://www.forumgdh.net/viewtopic.php?t=81731

Obrigado

[Visitante]

parei no passo 03 desse manual q veio com o drive... quando digito "make" KERNEL... da um errro {make file not found} (tipo assim) e o q é esse KERNEL_INCLUDES?

Installation

============

1. Unpack tar.gz package file:

$ gzip -dc slmdm-2.X.X.tar.gz | tar xf -

2. 'cd' to package directory:

$ cd slmdm-2.X.X

3. Review and edit (if need) 'Makefile'.

  Note: Probably you will want to correct in Makefile path to your

        local linux kernel header files:

        KERNEL_INCLUDES=/path/to/linux/include

        Another way is to pass command line the parameter while

        running 'make':

        $ make KERNEL_INCLUDES=/path/to/linux/include ...

4. Run 'make' command to compile package:

$ make

5. Install.

  If you are going to use AMR/CNR/PCI modem type (as superuser):

# make install-amr

  , or

# make install-usb

  if you are going to use USB modem.

  It will install:

  - modem kernel modules slmdm.o (modem core), slfax.o (fax)

    into '/lib/modules/<kernel-version>/misc' directory

    (standard linux modules' directory).

  - hardware specific kernel module slamrmo.o (for AMR/CNR/PCI) or

    slusb.o (for USB) into '/lib/modules/<kernel-version>/misc'

    directory (standard linux modules' directory).

  - country settings data file 'country.dat' into directory '/etc'.

  Also it will:

  - create character tty device entry '/dev/ttySL0' with major

    number 212 and symbolic link 'dev/modem'.

  - config you '/etc/modules.conf' file in order to provide

    possibility for loading the modem modules into kernel on demand

    automatically by kmod, when you are going to use them.

  Note: currently you cannot use both AMR/CNR/PCI and USB Modems.

6. Config modem country.

  You can configure your current country by using module parameters

  'country' or 'country_code'.

  Add 'options' directive line to file '/etc/modules.conf':

options slmdm country=<MyCountry>

  , for example

options slmdm country=USA

  , or use module parameter while module loading:

# modprobe slmdm country=<MyCountry>

  Use 'slver -c' to see list of all supported countries and their

  codes (utility 'slver' may be found in package directory).

  Note: Command ATI7 shows installed country setting.

7. Using the modem.

  Installation will automatically create character tty device entry

  '/dev/ttySL0' with major number 212 and symbolic link '/dev/modem'.

  Use one of them as modem device for your dialing application.

8. Uninstallation.

  In package directory just type:

# make uninstall

[douglasgm]

você tem o kernel headrs instalado?

[Visitante]

onde é q tem? e como instalo? (Conectiva 09)

[rodrigocanibal]

no cd de instalação do conectiva vai ter o kernel headers...

é só procurar na pasta RPM...

normalmente é kernel-header alguma coisa .rpm

ai instala ele e pronto!!

t++

[Mr Burns]

digite no shell rpm -q kernel-header . se aparecer kernel-header + uns numeros é q ele está instalado. agora se aparecer kernel-header não instalado , é só você instalar. ponha o cd, monte e acesse a pasta com os RPM's. depois digite rpm -i kernel-header. aí o pacote será instalado. no meu Red Hat funcionou assim...