Instalação Do Modem

[silvafabiano]

Estou tentando instalar o modem no Conectiva Linux 8, mas estou sem sucesso, os comando que o manual pede para usar eles não funcionam, o meu modem é Intel Ham Driver.

Esse é o manual.

Eu não consigo usar os comandos: make clean, make install e make ham. dá um erro de bash: command make not found (eu acho que é isso)

ReadMe file for the

Intel® MD563X-HaM V.92 chipset Linux driver

contents:

1. License

2. Release Notes

3. Installation

4. File Descriptions

5. International Users

6. Beta Tester appreciation

7. Security issues

8. Compilation issues

a. Instructions for Debian Users

b. Kernel Source

9. What is the Hamregistry?

10. what's v92 and v44?

11. The Hamregistry tool (for persistance)

12. Known Bugs/Issues

13. Comments, ideas, problems, fixes

-------------------------------------------------------------------------------

1. LICENSE

IMPORTANT - read the file "LICENSE.txt" for the INTEL SOFTWARE LICENSE

AGREEMENT BEFORE COPYING, INSTALLING OR USING.

also note:

The serial driver open source code located in the directory "serialdrv"

is work covered under the GNU GENERAL PUBLIC LICENSE (GPL).

The "serialdrv" directory has the GPL in the file "GPL.txt".

-------------------------------------------------------------------------------

2. Release Notes

This release supports 2.4.x kernels.

This release is not compatible to 2.2.x kernels, please use

the 333-5 Linux HaM driver.

The HaM corecode binary was compiled with gcc version 3.2

v92 support added: modem on hold AT command set,

PCM upstream, v44, and quick connect are implemented.

Linux Compatability tests are performed on the latest or previous

versions of the following distributions: Mandrake, RedHat, and SuSE

-------------------------------------------------------------------------------

3. INSTALLATION

Prerequisites:

1. root access

2. bash shell to run install scripts

3. a HaM modem

4. KERNEL SOURCE HEADERS FOR THE KERNEL YOU ARE RUNNING

(found on your distribution's CD)

6 steps to install

1. login as ROOT

2. extract the archive into a directory with "tar -zxvf <archivename>.tgz"

3. cd into the directory it created.

4. Type: make clean

5. Type: make ham

6. Type: make install

The installation script has been designed for the following distributions

release versions

mandrake-release

SuSE-release

redhat-release

debian_version (including Corel)

slackware-version

conectiva-version

bluepoint-release

Unknown distributions install modules and utilities but

will not install boot scripts!.

Please examine the haminst script if you have a different distribution.

The driver is split in two. A ham serial driver and core driver.

The core driver must be loaded first since the serial driver depends on it.

The serial driver registers itself as character device

major number 240, minor number 1.

The serial driver takes one argument right now, which is a number to

override the default major number if you need to.

ATTENTION: if the driver compiles but the script just wont work for you.

Here are the bare minimum steps to get your modem to work.

0. log in as root.

1. insmod -f hamcore.o

2. insmod -f ham.o

2a. you can start "hamregistry" at this point if you wish.

3. rm /dev/ham

4. mknod /dev/ham c 240 1 (note "240" is the default, if it does not

work see what /proc/devices says ham's major number is)

5. ln -s /dev/ham /dev/modem

6. start a comm application like minicom and use the modem.

7. see section 3 (International Users) for info on setting the correct

country settings.

-------------------------------------------------------------------------------

4. FILE DESCRIPTIONS

haminst installation script to install HaM modules and supporting files

files copied to /lib/modules/(kernel-version)/misc

hamcore.o driver core code module

ham.o pseudo serial driver for HaM, depends on hamcore.o

files copied to /etc/rc.d/... (path differes per distribution)

hamboot boot scrip to start and stop HaM modules

files copied to /usr/sbin

hamregistry hamregistry is the "registry" like tool that the modem uses to

get and store persistant data such as county info and profile strings.

files copied to /etc

hamregistry.bin file that stores the initial persistant data for modem.

-------------------------------------------------------------------------------

5. INTERNATIONAL USERS

hamregistry will store the last country setting you

set in the modem.

in minicom (or equivalent comm application)

the commmand to change country setting is "AT+GCI="

the command takes a t.35 country code in hexadecimal.

below is a list of currently supported t.35 country codes.

you can also put this "AT" command in the init string of

the comm application you are using.

if you are a CTR-21 country I think you should be able to

choose a CTR-21 country on the list and be ok. but

that's no guarantee.

The same goes for countries that are "USA" compatable.

(this table also exist in the source file wwh_dflt.c that

ships with the hamcore driver)

country code t.35 code

---------------------------

USA 1 B5

KOR 82 61

ECU 593 35

BOL 591 14

CHL 56 15

COL 57 27

PAN 507 85

PER 51 88

SAU 966 98

THA 66 A9

VNM 84 BC

SWE 46 A5

DNK 45 31

FIN 358 3C

NOR 47 82

ISL 354 52

IRL 353 57

ISR 972 58

LIE 423 68

ESP 34 A0

TUR 90 aí

DEU 49 42

AUT 43 0A

CHE 41 A6

CYP 357 2D

GRC 30 46

ITA 39 59

LUX 352 69

NLD 31 7B

GBR 44 B4

BEL 32 0F

FRA 33 3D

PRT 351 8B

PAK 92 84

JPN 81 00

RUS 7 B8

AUS 61 09

MYS 60 6C

CHN 86 26

HKG 852 50

SGP 65 9C

NZL 64 7E

ARG 54 07

BRA 55 16

MEX 52 73

TWN 886 E3

IND 91 53

PHL 63 89

IDN 62 54

BHS 103 0B

BRB 104 0E

BMU 105 12

GTM 502 49

HTI 509 4E

HND 504 4F

JAM 1 5B

NIC 505 7F

PRY 595 87

PRI 121 8C

SUR 597 A3

TTO 117 AC

URY 598 B7

VEN 58 BB

ZWE 263 C4

GUY 592 4D

EST 372 E0

HUN 36 51

SVN 386 E2

ARE 971 B3

SVK 421 2E

CAN 107 14

CRI 506 1B

DOM 110 33

SLV 503 37

GMB 220 41

GIB 350 45

POL 48 8A

EGY 20 36

CZE 420 2E

ZAF 27 9F

GUF 594 E1

-------------------------------------------------------------------------------

6. Thanks to the following beta testers for their valuable input and

suggestions during the HaM 333 beta test between January 2 - 26, 2001

Dorian S. Araneda

Sean Walbran

Rob Clark

Marvin Stodolsky

Dominique Duval

Roman Krais

Ulrich Guenther

Marcelino Viana Pinheiro

Thomas S. Iversen

Jospeh Teichman

Michel Bartolone (MED)

Ramon Gonzalez Montoiro

Ryoji Kawagishi

Torsten Vogel

"jandro"

Ian Carr-de Avelon

Helga Weindl

Ed Casas

Bernhard Hoelcker

Alexander "Sasha" Voytov

Albert Woo

Peter Hirschmann

and all of the helpful Linux HaM users

around the world and at www.linmodems.org

-------------------------------------------------------------------------------

7. Security issues

the haminst and hamboot file install the files and device nodes as

root for the owner and group.

this will cause problems for those who want to user the modem to dialout

using an account other than root.

In SuSE, "dialout" is the group used to install the files and device node.

This way, anyone belonging to the "dialout" group can use the modem to dialout.

(take a look at /etc/group)

I did not want the script to allow full access of the modem to everyone without

"root" knowing.

Edit the hamboot and haminst scripts to fit your needs.

-------------------------------------------------------------------------------

8. Compile issues

a. this driver will now compile with the this path:

/lib/modules/<kernel version>/build/include

the 2.4.4+ kernels says to copy the /boot/vmlinuz.version.h

over to the kernel build path. I have the makefile do this

if this file exists. You must install the kernel source

code anyways. It should be on your distribution's CD.

-------------------------------------------------------------------------------

9. What is the Hamregistry?

The hamregistery is an application that stores data for the ham driver onto

the disk. hamregistry stores information from the driver that needs to

persist from reboot to reboot such as you current country setting.

The haminst install script and the hamboot script start this utility

automatically for you.

If this tool is not present when the driver gets used your profile,

quickconnect, and current country setting will not be saved but the driver

should still work fine. The only step that would need to be done is to

make sure that the driver is set

[k0d31n3]

cara, você provavelmente não instalou os pacotes do make... instala eles que provavelmente o problema vai se resolver...