raid 0

Usuário Socialista · 9 de janeiro de 2017

Galera, estou tentando fazer raid 0 no meu pc e não estou conseguindo acessar a tela para fazer o arranjo. ja tentei control + r, control + f, control + a, control + i porém não consigo

Alguem sabe o que tenho que fazer?.

minha placa-mãe é g1 sniper a88x.

processador amd

Paulo_silver · 9 de janeiro de 2017

Citação

C-2. Configuring Legacy RAID ROM Enter the legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the installation of Windows operating system for a non-RAID configuration. Steps: After the POST memory test begins and before the operating system boot begins. Press + to enter the RAID BIOS setup utility. Creating a RAID Array 1. To create a new array, press on the Create Array option. 2. The selection bar will move to the Disks section on the right of the screen. Select the hard drives to be included in the RAID array. Use the up or down arrow key to select a hard drive and press . The selected hard drive will be shown in green. To use all of the hard drives, simply press to select all. Then press and the selection bar will move to the User Input section on the left bottom of the screen. 3. First, select a RAID mode and press . The selections available depend on the number of the hard drives being installed. Then follow the on-screen instructions to specify the array size. You can select All available space to use the maximum size allowed or use the up or down arrow key to adjust the size and press . 4. Select a caching mode. Options include Read/Write, Read Only, and None. Then press to proceed. 5. Finally, a message which says "Confirm Creation of Array" will appear. Press to confirm or to return to the previous screen. When completed, you will see the new array on the main screen. To exit the RAID BIOS utility, press and then press to confirm.

Fonte:http://br.gigabyte.com/products/product-page.aspx?pid=4683#manual

Control + R (após instalar o windows)
Confira mais informações pelo manual em caso de duvidas.