m748 suporta uma mamo de 133?

[kingtiger]

pessoal gostaria de saber se a plama mãe m748 suporta um pente de memo de pc133

[André_Maia]

Segue abaixo a primeira parte do manual, pelo que consta funciona com pc66 e pc100, mas talvez a pc133 funcione como se fosse pc100, tem que ver se a placa ira detecta-la.

Key Features

This key features of this mainboard include:

Slot-1 Processor Support

• Pentium-III support for 450 MHz and 800 MHz clock rates

• Pentium-II support for 233 MHz to 450 MHz clock rates

• SEPP Celeron support for 266 MHz to 433 MHz clock rates

• Support for 66 MHz and 100 MHz FSB (Front Side Bus)

• All processors configured by CPU Plug & Play

Socket-370 Processor Support

• Supports PPGA Celeron CPUs which provide Pentium-II performance with integrated level 1 and level 2 cache

• FCPGA Pentium III CPUs are supported

• Supports 66 MHz and 100 MHz front side system bus

• All Celerons are automatically configured using firmware

Memory Support

• Three DIMM slots for SDRAM 168-pin memory modules

• Support for 66 MHz & 100 MHz memory bus

• Maximum installed memory can be 3 x 256 MB = 768 MB

Expansion Slots

• One 32-bit PCI slot

• One 8/16-bit ISA slot

Onboard IDE channels

• Primary and Secondary PCI IDE channels

• Support for PIO (programmable input/output) modes

• Support for Bus mastering and UltraDMA 33/66 modes

Power Supply and Power Management

• Dual connector for either an AT or ATX power supply

• Support for Green PC standard, suspend switch, keyboard power on/off

[assshop]

e se atualizar a bios sera que pega???