Ir ao conteúdo
  • Cadastre-se

Problema rede durante instalação - Notebook DELL Inspiron 1720


doraimom

Posts recomendados

Olá.

Tentei instalar o Debian Testing aqui no meu PC, porém ele parece não ter detectado a placa de rede corretamente e consequentemente o servidor DHPC.

ELe detecta a placa de rede como sendo alguma coisa como: Linux Floopy. ISso mesmo. Floopy na detecção da placa de rede.

Meu notebook é um Dell Inspiron 1720.

A placa de rede é: Boardcom 440x 10/100 Integrated

Depois de muito trabalho consegui salvar a saída do lspci e até do dmesg. Vou postar aqui e espero que agora possam me ajudar. SAIDAS CONSEGUIDAS PELO DEBIAN LENNY TESTING E COMANDOS APLICADOS DURANTE A INSTALAÇãO, ANTES DA instalação DE PACOTES

SAIDA DMESG:

4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 58

PCI: Setting latency timer of device 0000:00:1d.2 to 64

uhci_hcd 0000:00:1d.2: UHCI Host Controller

uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5

uhci_hcd 0000:00:1d.2: irq 58, io base 0x00006f40

usb usb5: configuration #1 chosen from 1 choice

hub 5-0:1.0: USB hub found

hub 5-0:1.0: 2 ports detected

ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 58

PCI: Setting latency timer of device 0000:00:1a.7 to 64

ehci_hcd 0000:00:1a.7: EHCI Host Controller

ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6

ehci_hcd 0000:00:1a.7: debug port 1

PCI: cache line size of 32 is not supported by device 0000:00:1a.7

ehci_hcd 0000:00:1a.7: irq 58, io mem 0xfed1c400

ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb6: configuration #1 chosen from 1 choice

hub 6-0:1.0: USB hub found

hub 6-0:1.0: 4 ports detected

usb 3-2: new low speed USB device using uhci_hcd and address 2

ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233

PCI: Setting latency timer of device 0000:00:1d.7 to 64

ehci_hcd 0000:00:1d.7: EHCI Host Controller

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7

ehci_hcd 0000:00:1d.7: debug port 1

PCI: cache line size of 32 is not supported by device 0000:00:1d.7

ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfed1c000

ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

usb usb7: configuration #1 chosen from 1 choice

hub 7-0:1.0: USB hub found

hub 7-0:1.0: 6 ports detected

ICH8M: IDE controller at PCI slot 0000:00:1f.1

ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169

ICH8M: chipset revision 2

ICH8M: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0x6fa0-0x6fa7, BIOS settings: hda:DMA, hdb:pio

Probing IDE interface ide0...

usb 3-2: device not accepting address 2, error -71

hda: PBDS DVD+/-RW DS-8W1P, ATAPI CD/DVD-ROM drive

usb 7-6: new high speed USB device using ehci_hcd and address 3

usb 7-6: configuration #1 chosen from 1 choice

usb 3-2: new low speed USB device using uhci_hcd and address 4

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ahci 0000:00:1f.2: version 2.0

ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 17 (level, low) -> IRQ 177

hda: ATAPI 47X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

usb 3-2: configuration #1 chosen from 1 choice

usbcore: registered new driver hiddev

input: Microsoft Microsoft Trackball Optical® as /class/input/input1

input: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Optical®] on usb-0000:00:1d.0-2

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.6:USB HID core driver

PCI: Setting latency timer of device 0000:00:1f.2 to 64

ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode

ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part

ata1: SATA max UDMA/133 cmd 0xF882E900 ctl 0x0 bmdma 0x0 irq 66

ata2: SATA max UDMA/133 cmd 0xF882E980 ctl 0x0 bmdma 0x0 irq 66

ata3: SATA max UDMA/133 cmd 0xF882EA00 ctl 0x0 bmdma 0x0 irq 66

scsi0 : ahci

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32)

ata1.00: ata1: dev 0 multi count 8

ata1.00: configured for UDMA/133

scsi1 : ahci

ata2: SATA link down (SStatus 0 SControl 0)

scsi2 : ahci

ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

ata3.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32)

ata3.00: ata3: dev 0 multi count 8

ata3.00: configured for UDMA/133

Vendor: ATA Model: ST9160821AS Rev: 3.CD

Type: Direct-Access ANSI SCSI revision: 05

Vendor: ATA Model: WDC WD1600BEVS-7 Rev: 04.0

Type: Direct-Access ANSI SCSI revision: 05

ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 185

ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4]

SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)

sda: Write Protect is off

sda: Mode Sense: 00 3a 00 00

SCSI device sda: drive cache: write back

SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)

sda: Write Protect is off

sda: Mode Sense: 00 3a 00 00

SCSI device sda: drive cache: write back

sda: sda1 sda2 sda3 < sda5 >

sd 0:0:0:0: Attached scsi disk sda

SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)

sdb: Write Protect is off

sdb: Mode Sense: 00 3a 00 00

SCSI device sdb: drive cache: write back

SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)

sdb: Write Protect is off

sdb: Mode Sense: 00 3a 00 00

SCSI device sdb: drive cache: write back

sdb: sdb1

sd 2:0:0:0: Attached scsi disk sdb

ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]

ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]

ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

ACPI: Processor [CPU0] (supports 8 throttling states)

ACPI: Getting cpuindex for acpiid 0x1

ACPI: Thermal Zone [THM] (57 C)

usbcore: registered new driver usbkbd

drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver

usbcore: registered new driver usbserial

drivers/usb/serial/usb-serial.c: USB Serial support registered for generic

usbcore: registered new driver usbserial_generic

drivers/usb/serial/usb-serial.c: USB Serial Driver core

vga16fb: initializing

vga16fb: mapped to 0xc00a0000

Console: switching to colour frame buffer device 80x30

fb0: VGA16 VGA frame buffer device

ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc0002ad73d81]

Time: hpet clocksource has been installed.

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

Floppy drive(s): fd0 is 1.44M

floppy0: no floppy controllers found

Probing IDE interface ide1...

ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)

ieee1394: sbp2: Try serialize_io=0 for better performance

Intel ISA PCIC probe: not found.

ISO 9660 Extensions: Microsoft Joliet Level 3

ISO 9660 Extensions: RRIP_1991A

b44.c:v1.01 (Jun 16, 2006)

ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177

eth0: Broadcom 4400 10/100BaseT Ethernet 00:1c:23:8d:5c:20

Floppy drive(s): fd0 is 1.44M

floppy0: no floppy controllers found

Intel ISA PCIC probe: not found.

Intel ISA PCIC probe: not found.

Floppy drive(s): fd0 is 1.44M

floppy0: no floppy controllers found

Intel ISA PCIC probe: not found.

Floppy drive(s): fd0 is 1.44M

floppy0: no floppy controllers found

Intel ISA PCIC probe: not found.

usb 7-1: new high speed USB device using ehci_hcd and address 4

usb 7-1: configuration #1 chosen from 1 choice

scsi3 : SCSI emulation for USB Mass Storage devices

usb-storage: device found at 4

usb-storage: waiting for device to settle before scanning

Vendor: Apple Model: iPod Rev: 1.62

Type: Direct-Access ANSI SCSI revision: 00

SCSI device sdc: 78126047 512-byte hdwr sectors (40001 MB)

sdc: Write Protect is off

sdc: Mode Sense: 64 00 00 08

sdc: assuming drive cache: write through

SCSI device sdc: 78126047 512-byte hdwr sectors (40001 MB)

sdc: Write Protect is off

sdc: Mode Sense: 64 00 00 08

sdc: assuming drive cache: write through

sdc: sdc1 sdc2

sd 3:0:0:0: Attached scsi removable disk sdc

usb-storage: device scan complete

attempt to access beyond end of device

sda3: rw=0, want=4, limit=2

EXT2-fs: unable to read superblock

attempt to access beyond end of device

sda3: rw=0, want=66, limit=2

isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32

SAIDA LSPCI

00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c)

Subsystem: Dell Unknown device 01f2

Flags: bus master, fast devsel, latency 0

Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation Mobile PCI Express Root Port (rev 0c)

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=01, subordinate=01, sec-latency=0

I/O behind bridge: 0000e000-0000efff

Memory behind bridge: fa000000-feafffff

Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff

Capabilities: [88] Subsystem: Dell Unknown device 01f2

Capabilities: [80] Power Management version 3

Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Capabilities: [a0] Express Root Port (Slot+) IRQ 0

Capabilities: [100] Virtual Channel

Capabilities: [140] Unknown (5)

00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 233

I/O ports at 6f20

00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 50

I/O ports at 6f00

00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 02) (prog-if 20)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 58

Memory at fed1c400 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [58] Debug port

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, fast devsel, latency 0, IRQ 10

Memory at febfc000 (64-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [70] Express Unknown type IRQ 0

Capabilities: [100] Virtual Channel

Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Capabilities: [90] Subsystem: Dell Unknown device 01f2

Capabilities: [a0] Power Management version 2

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0

Memory behind bridge: f9f00000-f9ffffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Capabilities: [90] Subsystem: Dell Unknown device 01f2

Capabilities: [a0] Power Management version 2

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: f9c00000-f9efffff

Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff

Capabilities: [40] Express Root Port (Slot+) IRQ 0

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+

Capabilities: [90] Subsystem: Dell Unknown device 01f2

Capabilities: [a0] Power Management version 2

Capabilities: [100] Virtual Channel

Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 233

I/O ports at 6f80

00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 50

I/O ports at 6f60

00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 58

I/O ports at 6f40

00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 02) (prog-if 20)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 233

Memory at fed1c000 (32-bit, non-prefetchable)

Capabilities: [50] Power Management version 2

Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) (prog-if 01)

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=32

Memory behind bridge: f9b00000-f9bfffff

Capabilities: [50] Subsystem: Dell Unknown device 01f2

00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0

Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 0, IRQ 169

I/O ports at <ignored>

I/O ports at <ignored>

I/O ports at <ignored>

I/O ports at <ignored>

I/O ports at 6fa0

00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 02) (prog-if 01)

Subsystem: Dell Unknown device 01f2

Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 66

I/O ports at 6eb0

I/O ports at 6eb8

I/O ports at 6ec0

I/O ports at 6ec8

I/O ports at 6ee0

Memory at febfb800 (32-bit, non-prefetchable)

Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+

Capabilities: [70] Power Management version 3

Capabilities: [a8] #12 [0010]

00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: medium devsel, IRQ 10

Memory at febfb700 (32-bit, non-prefetchable)

I/O ports at 10c0

01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0407 (rev a1)

Subsystem: Dell Unknown device 01f2

Flags: bus master, fast devsel, latency 0, IRQ 7

Memory at fd000000 (32-bit, non-prefetchable)

Memory at e0000000 (64-bit, prefetchable)

Memory at fa000000 (64-bit, non-prefetchable)

I/O ports at ef00

Expansion ROM at fea00000 [disabled]

Capabilities: [60] Power Management version 2

Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [78] Express Endpoint IRQ 0

Capabilities: [100] Virtual Channel

Capabilities: [128] Power Budgeting

Capabilities: [600] Unknown (11)

03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)

Subsystem: Dell Unknown device 01f2

Flags: bus master, fast devsel, latency 64, IRQ 177

Memory at f9bfe000 (32-bit, non-prefetchable)

Capabilities: [40] Power Management version 2

03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 05) (prog-if 10)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 64, IRQ 185

Memory at f9bfd800 (32-bit, non-prefetchable)

Capabilities: [dc] Power Management version 2

03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 64, IRQ 4

Memory at f9bfd400 (32-bit, non-prefetchable)

Capabilities: [80] Power Management version 2

03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 12)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 64, IRQ 4

Memory at f9bfd500 (32-bit, non-prefetchable)

Capabilities: [80] Power Management version 2

03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 64, IRQ 4

Memory at f9bfd600 (32-bit, non-prefetchable)

Capabilities: [80] Power Management version 2

03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)

Subsystem: Dell Unknown device 01f2

Flags: bus master, medium devsel, latency 64, IRQ 4

Memory at f9bfd700 (32-bit, non-prefetchable)

Capabilities: [80] Power Management version 2

0c:00.0 Network controller: Intel Corporation Unknown device 4229 (rev 61)

Subsystem: Intel Corporation Unknown device 1120

Flags: bus master, fast devsel, latency 0, IRQ 10

Memory at f9ffe000 (64-bit, non-prefetchable)

Capabilities: [c8] Power Management version 3

Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

Capabilities: [e0] Express Endpoint IRQ 0

Capabilities: [100] Advanced Error Reporting

Capabilities: [140] Device Serial Number 2d-59-7a-ff-ff-e8-13-00

Link para o comentário
Compartilhar em outros sites

  • 2 semanas depois...

Testei com o DVD dessa semana e tambem não deu certo. Novos dados:

SAIDAS CONSEGUIDAS PELO DEBIAN LENNY TESTING E COMANDOS APLICADOS DURANTE A INSTALAÇãO, ANTES DA instalação DE PACOTES

saida do LSMOD

Module Size Used by

nls_cp437 5760 1

vfat 11392 1

fat 45596 1 vfat

b44 23820 0

mii 5376 1 b44

nls_iso8859_1 4096 2

rsrc_nonstatic 11648 0

pcmcia_core 35856 1 rsrc_nonstatic

sbp2 20232 0

isofs 31544 1

ide_disk 14720 0

ide_generic 1280 0 [permanent]

pdc202xx_new 7808 0 [permanent]

aec62xx 6656 0 [permanent]

alim15x3 11020 0 [permanent]

amd74xx 12956 0 [permanent]

atiixp 5776 0 [permanent]

cmd64x 9884 0 [permanent]

cs5520 4608 0 [permanent]

cs5530 4864 0 [permanent]

cs5535 4224 0 [permanent]

cy82c693 4356 0 [permanent]

hpt34x 4992 0 [permanent]

it821x 7684 0 [permanent]

jmicron 4096 0 [permanent]

ns87415 4168 0 [permanent]

opti621 3972 0 [permanent]

pdc202xx_old 9344 0 [permanent]

rz1000 2688 0 [permanent]

sc1200 6528 0 [permanent]

serverworks 8328 0 [permanent]

siimage 10880 0 [permanent]

sis5513 12296 0 [permanent]

slc90e66 4992 0 [permanent]

triflex 3712 0 [permanent]

trm290 3972 0 [permanent]

via82cxxx 8324 0 [permanent]

usb_storage 70848 1

vga16fb 11148 2

vgastate 7680 1 vga16fb

usbserial 28136 0

usbkbd 6656 0

thermal 13320 0

processor 23212 1 thermal

fan 4740 0

sd_mod 18832 2

usbhid 35552 0

ide_cd 35360 1

cdrom 32160 1 ide_cd

generic 5380 0 [permanent]

ohci1394 29744 0

ieee1394 84408 2 sbp2,ohci1394

ahci 17540 0

libata 87316 1 ahci

scsi_mod 121352 5 sbp2,usb_storage,sd_mod,ahci,libata

piix 9092 0 [permanent]

ide_core 107248 31 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3 ,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c6 93,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_ old,rz1000,sc1200,serverworks,siimage,sis5513,slc9 0e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,g eneric,piix

ehci_hcd 26888 0

uhci_hcd 19980 0

usbcore 108676 7 usb_storage,usbserial,usbkbd,usbhid,ehci_hcd,uhci_ hcd

SAIDA IFCONFIG

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

cat /etc/network/interfaces NAO EXISTE.

Peguei no lugar o único que existia cat /etc/network/devnames

eth0:Broadcom Corporation BCM4401-B0 100Base-TX
Link para o comentário
Compartilhar em outros sites

Arquivado

Este tópico foi arquivado e está fechado para novas respostas.

Sobre o Clube do Hardware

No ar desde 1996, o Clube do Hardware é uma das maiores, mais antigas e mais respeitadas comunidades sobre tecnologia do Brasil. Leia mais

Direitos autorais

Não permitimos a cópia ou reprodução do conteúdo do nosso site, fórum, newsletters e redes sociais, mesmo citando-se a fonte. Leia mais

×
×
  • Criar novo...

 

GRÁTIS: ebook Redes Wi-Fi – 2ª Edição

EBOOK GRÁTIS!

CLIQUE AQUI E BAIXE AGORA MESMO!