Problemas C/ Placa De Som No 2000

[Lucci]

Senhores:

Estou com problemas na configuração da placa de som no win2000 prof. Tenho uma OPTI Áudio 16 da Soundsystem HOT – 247 version 3.0. Quando mando instalar o drive pelo CD vem apenas uma informação para WIM NT 3.51/4.0 que é a que segue no readme.nt. Tentei atualizar os drives pela rede, mas o 2000 alerta com informações de possíveis transtornos se efetivar a instalação. Qualquer ajuda para instalar estes drives será bem vinda. Informações adicionais poderão ser fornecidas se solicitadas. Desde já agradeço.

HOT-247 Spacewalker Soundsystem 3D 64 Voices Wavetable ( OPTi 82c933 )

Windows NT 3.51/4.0 Audio Driver LATEST INFORMATION

( Version 1.04 )

11/24/97

This is the OPTi 82c930, 82c931 and 82C933 audio driver release for Windows NT

version 3.51/4.00. Throughout this readme file, 82c93x refers to

HOT-235,241,245,245A,247 ( 82c930, 82C931(LC, AD, and MB versions), and 82C933 ).

This Windows NT driver provides the following support for OPTi 82c93x-

based sound card:

Wave playback/capture

Midi playback

MPU-401 Playback/Record

Mic recording

Volume control

Driver installation/configuration

IDE CD-ROM support ( for HOT-235,241 only )

Gameport control

0. What is new in this release

This release has the following changes from v1.03:

- Ready for NT 4.0 Audio Test Kit.

- Default WSS Audio to IRQ 5 instead of 11.

- Default WSS DMA out to 1 and DMA in to 0 (full Duplex enable)

- Default MPU 401 port address to 330 instead of 300.

- Dialog box will not show Single Mode DMA option

- Microphone volume out value default to 0 to prevent feedback to Speaker.

The following are features and supports in v1.03 that are changed from

the previous release v1.01,

- 931 LC support

- MPU-401 support

- Full Duplex DMA support

- 16 bit DMA Channels Support ( HOT-245,245A,247 only)

- Gameport ON/OFF control

- New Configuration dialog

- New MIDIMAP.CFG

1. SOFTWARE PACKAGE CONTENTS

The OPTi 82c93x Windows NT Audio Driver installation package contains

the following files:

OEMSETUP.INF - Windows NT driver installation text file

SND93x.DLL - Windows NT user mode driver for OPTi 82c93x.

SND93x.SYS - Windows NT kernel mode driver for OPTi 82c93x.

SND3INIT.SYS - Windows NT kernel mode driver for setting OPTi

82c93x on-board IDE CD-ROM interface.

MIDIMAP.CFG - Midi Mapper for OPTi93x.

README.NT - HOT-247 help file.

2. INSTALLATION PROCESS

The installation process assumes that Windows NT has been installed.

Refer to documents for Windows NT installation.

Step 1:

Insert HOT-247 card in the system. Refer to your menu for

proper sound card hardware installation.

Step 2:

Logged on Windows NT in Administrator mode. Windows NT audio

driver can't be installed or modified unless Windows NT is started

in Adminstrator mode.

Step 3:

For Windows NT v3.51:

Choose Drivers icon from Control Panel.

Remove all of the following previously installed audio drivers:

Windows Sound System

OPTi 82c930

OPTi 82c930,82c931

OPTi 82c93x Audio Driver

Restart system.

For Windows NT v4.00:

Choose Multimedia from Control Panel.

Click on Devices tab.

Click on Audio Devices.

Remove all of the following previously installed audio drivers:

Audio for Windows Sound System

Audio for OPTi 82c930

Audio for OPTi 82c930,82c931

Audio for OPTi 82c93x Audio Driver

Restart system.

Step 4:

For Windows NT v3.51:

Start Windows NT in Administrator mode.

Choose Drivers icon from Control Panel.

Click the Add button in Drivers dialog box.

Select "Unlisted or Updated Driver" and click the OK button.

Insert the HOT-247 Installation CD into your CD-ROM drive

and browse path to D:\DRIVER\WINNT\ENGLISH

( or GERMAN,FRENCH,ITALIAN,CHINESE,JAPANESE,SPANISH ).

Click the OK button in the "Add Unlisted or Updated Driver" box.

For Windows NT v4.00:

Start Windows NT in Administrator mode.

Choose Multimedia from Control Panel.

Click on Devices tab.

Click the Add Button.

Select "Unlisted or Updated Driver" and click the OK button.

Insert the HOT-247 Installation CD into your CD-ROM drive

and browse path to D:\DRIVER\WINNT\ENGLISH

( or GERMAN,FRENCH,ITALIAN,CHINESE,JAPANESE,SPANISH ).

Click the OK button in the "Add Unlisted or Updated Driver" box.

Step 5:

A setup dialog box will appear.

Configure the Audio, MPU-401, Gameport, CD-ROM, and advanced options.

Choose the CD-ROM Interface Settings for selecting whether to enable

or disable the on-board IDE CD-ROM interface. Please note HOT-247 has

no IDE CD-ROM support.

Choose the OK button to accept the settings.

Step 6:

Choose the Restart Now button to have the new driver and any changed

driver settings to take effect when Windows NT restart.

3. CHANGING DRIVER SETTINGS AFTER INSTALLATION

Driver settings can be changed after installation.

Step 1:

Logged on Windows NT in Administrator mode.

Step 2:

For Windows NT v3.51:

Choose Drivers icon from Control Panel.

Select OPTi 82c93x in Installed Drivers Dialog box.

Click the Setup button.

For Windows NT v4.00:

Choose Multimedia from Control Panel.

Click on Devices tab.

Click on Audio Devices.

Click on Audio for OPTi 82c93x.

Click the Settings button.

Follows Step 5 and 6 of INSTALLATION PROCESS above.

4. INSTALLATION DETAILS

The Windows NT driver installation does the following:

- Copy files to your hard disk.

SND93x.SYS, SND93x.DLL, SND3INIT.SYS, MIDIMAP.CFG and

README.NT are copied to the NT system directories.

- Create/Update configuration information in the registry

The following two Keys are created in the registry under

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services path:

snd93x

snd3init

- Reboot system.

5. CD-ROM INSTALLATION NOTES

Please note that HOT-245,245A,247 have no IDE CD-ROM support.

HOT-235,241 has IDE CD-ROM support.

The CD-ROM Interface Settings in driver setup provides the choice of

enable or disable the 82c93x on board IDE CD-ROM interface (Default to

disabled). It DOESN'T install the NT IDE CD-ROM driver.

It's your responsibility to install the NT IDE-CD ROM driver.

To install an IDE CD-ROM drive that is connected to 82c93x:

- Make sure there is no secondary IDE port that is enabled on

your system motherboard or another add-on card.

- Choose "Enable IDE CD-ROM Interface" check box. This instructs the

kernel mode driver sndinit.sys to enable the 82c93x on board

secondary IDE port 170h and IRQ15 upon NT boot time.

- To install the Windows NT IDE CD-ROM driver (ATAPI.SYS), please refer

to the Windows NT System Guide.

6. FULL DUPLEX DMA SUPPORT

Click on "Enable Full Duplex" check box and select the DMA Playback

and record channels to enable simultaneous Playback and Capture on

different DMA channels.

Full Duplex DMA on HOT-235,241,245,245A,247 only supports playback and capture of

the wave audio with same audio format. For example, a PCM 22.050 kHz,8 bit, Mono

wave audio stream is allowed to record to a a PCM 22.050 kHz,8 bit, Mono wave audio

stream not any other audio format.

7. 16-bit DMA SUPPORT

16-bit DMA is supported only in HOT-245,245A,247.

DMA channels 5 and 6 are both 16-bit DMA channels.

Both Playback and Capture DMA channels can be configured using

these 16-bit DMA channels.

8. MPU-401 SUPPORT

Click on "Enable MPU-401" check box and configure MPU-401 I/O and IRQ.

To select between "OPTi FM" and "OPTi MPU-401" for MIDI files.

For Windows NT v3.51:

Use Midimapper from Control Panel

For Windows NT v4.00:

Use MIDI tab in Multimedia from Control Panel

9. MIXER CONTROL

- Before changing driver settings from Control Panel, be sure to close

the audio Mixer Volume Control.

- For HOT-235 : Midi mixer line controls both FM Synthesizer and MPU-401 volume.

- For HOT-241,245,245A,247 : Midi mixer line controls FM Synthesizer

Wavetable/MPU-401 line controls MPU-401 volume.