Folding@Home - Cliente V7

VitorWolff · 26 de setembro de 2011

Vitor, lamento informar mas essas wus não serão enviadas, já que é uma falha em um servidor que recebe essas wus. O cliente v7 tem essa deficiência, ele pega um servidor bom que envia algumas wus normais que são recebidas e processadas, e também algumas exclusivas do cliente v7 que são recebidas e nunca enviadas.
Recomendo terminantemente que passe a usar o cliente smp normal e deixe o v7 de lado, do contrário você só passará raiva e frustração com wus processadas que tentam serem enviadas todas ao mesmo tempo, e no meu caso, causando paralisia na internet.

O meu maior problema foi a parte de não conseguir configurar corretamente o cliente SMP, já o v7 funciona muito bem.

Tendo essa grande falha que acaba sendo motivo de frustrações, tenho 8 WUs que não foram enviadas, imagino quantos pontos eu perdi com isso então...

EDIT:

Eu observei que tanto o Work Server quanto o Collection Server, as WUs que falharam vem de servidores com endereços iguais, no caso delas 6 são de um servidor e 2 de um outro.

Não teria algum modo de bloquear esses servidores "defeituosos"?

EribertoTorres · 26 de setembro de 2011

Mais fácil você pedir uma mão para configurar o smp normal do que passar raiva Vai por mim que já perdi mais de 20 wus nessa brincadeira e o meu amigo jow que estava tentando me ajudar na pontuação e perdeu outro montão. É jogar literalmente dinheiro no lixo e ajuda fora, porque se o trabalho não for entregue, teoricamente ele não foi feito, e o pior, atrapalha o projeto porque essa wu poderia ser entregue a alguém que tenha mais sorte.

VitorWolff · 26 de setembro de 2011

Mais fácil você pedir uma mão para configurar o smp normal do que passar raiva Vai por mim que já perdi mais de 20 wus nessa brincadeira e o meu amigo jow que estava tentando me ajudar na pontuação e perdeu outro montão. É jogar literalmente dinheiro no lixo e ajuda fora, porque se o trabalho não for entregue, teoricamente ele não foi feito, e o pior, atrapalha o projeto porque essa wu poderia ser entregue a alguém que tenha mais sorte.

Certo e você poderia me indicar alguém para me ajudar na configuração?

Acredito que via MSN seria a melhor via para isso não?

V i X · 26 de setembro de 2011

Eriba, pra falar a verdade eu já perdi muito mais WUs no SMP do que no V7 (na verdade não lembro de ter perdido nenhuma no V7). O que ocorre é que não importa o cliente, se o servidor é o mesmo, não vai enviar de qualquer jeito.

Vitor, eu tentaria pôr o parâmetro advmethods no cliente V7 para ver se ele pega WUs de servidores que estão funcionais (no tutorial do V7 explica como pôr o parâmetro).

No mais, se não funcionar, aí sim instalaria o SMP (que é relativamente fácil de instalar também, seguindo o tutorial do João: http://forum.clubedohardware.com.br/tutorial-instalando-smp/844726).

VitorWolff · 26 de setembro de 2011

Eu removi o cliente v7 e coloquei o SMP o problema é que mesmo seguindo o tutorial eu não consigo fazer com que ele use 100%, fica usando somente 25% da cpu...

EribertoTorres · 26 de setembro de 2011

Verifique qual core ele baixou, pois é comum que ele baixe algum cliente single core mesmo estando configurado como smp.

Veja pelo gerenciador de tarefas se não souber ver pelo log, vai ter algo como fahcore78, fahcorea4, fahcorea3

VitorWolff · 26 de setembro de 2011

Bem vou voltar a usar o cliente v7 porque com ele pontiei muito mais do que antes mesmo usando esse i5.

Vou ficar monitorando agora em diante as WUs que ficarem com problemas.

Quanto ao parametro advmethods qual o valor que eu devo colocar? Ou deixo-o em branco?

V i X · 26 de setembro de 2011

Eu removi o cliente v7 e coloquei o SMP o problema é que mesmo seguindo o tutorial eu não consigo fazer com que ele use 100%, fica usando somente 25% da cpu...

Você adicionou o parâmetro '-smp'? Você tem que copiar o arquivo .exe que foi criado quando você descompactou o arquivo baixado e colá-lo na área de trabalho, criando assim um atalho. Então clique com o botão direito sobre o atalho, vá em 'Propriedades', depois, na aba 'Atalho', digite -smp no final do campo 'Destino' (tem que deixar um espaço entre o parâmetro -smp e o resto do endereço). Depois basta iniciar novamente o cliente e ver se todos os núcleos estão sendo utilizados.

Bem vou voltar a usar o cliente v7 porque com ele pontiei muito mais do que antes mesmo usando esse i5.
Vou ficar monitorando agora em diante as WUs que ficarem com problemas.

Quanto ao parametro advmethods qual o valor que eu devo colocar? Ou deixo-o em branco?

Quanto à isso, basta digitar client-type no campo 'Name' e advanced no campo 'Value'.

VitorWolff · 29 de setembro de 2011

Opa galera, tava aqui pensando com os meus botões, tem cliente para windows x64?

Se sim o desempenho é maior do que o cliente x86?

V i X · 29 de setembro de 2011

Opa galera, tava aqui pensando com os meus botões, tem cliente para windows x64?
Se sim o desempenho é maior do que o cliente x86?

Os clientes para Windows servem tanto para versões 32 bits quanto 64 bits.

VitorWolff · 29 de setembro de 2011

Mas não foi desenvolvida uma versão exclusivamente 64 bits certo?

V i X · 29 de setembro de 2011

Mas não foi desenvolvida uma versão exclusivamente 64 bits certo?

Para Windows não.

RP4 · 19 de outubro de 2011

Galera, meu cliente SMP tem demorado MUITO pra fazer 1%, enquanto o GPU tem demorado 2'15" pra fazer 1%.

Antes de eu formatar o SMP ficava entre 4~9minutos pra fazer 1%.

Uma screenshot pra mostrar:

EDIT: Esqueci de mencionar que não consigo adicionar flags nos clientes (tipo aquelas client-type=advanced e tal), ele simplesmente não salva.

Zeca Pagodinho · 19 de outubro de 2011

Galera, meu cliente SMP tem demorado MUITO pra fazer 1%, enquanto o GPU tem demorado 2'15" pra fazer 1%.
Antes de eu formatar o SMP ficava entre 4~9minutos pra fazer 1%.

Uma screenshot pra mostrar:

EDIT: Esqueci de mencionar que não consigo adicionar flags nos clientes (tipo aquelas client-type=advanced e tal), ele simplesmente não salva.

Acima, à direita, tem a aba "Log". Clica nela e copia um trecho do log onde você esteve com o computador sem uso e posta aqui para a gente analisar. Por favor, também nos informe qual é a versão do cliente V7.

Se, após análise do Log, não tivermos encontrado alterações, iremos à análise dos processo que estão rodando no Windows. Aí eu passo a bola aos usuários desse SO (até tenho em dual boot, mas quase não uso).

Até mais.

RP4 · 20 de outubro de 2011

Acima, à direita, tem a aba "Log". Clica nela e copia um trecho do log onde você esteve com o computador sem uso e posta aqui para a gente analisar. Por favor, também nos informe qual é a versão do cliente V7.
Se, após análise do Log, não tivermos encontrado alterações, iremos à análise dos processo que estão rodando no Windows. Aí eu passo a bola aos usuários desse SO (até tenho em dual boot, mas quase não uso).

Até mais.

21:08:25:Started core on PID 5800
21:08:25:FahCore 0x11 started
21:08:25:Unit 02:
21:08:25:Unit 02:*------------------------------*
21:08:25:Unit 02:Folding@Home Gromacs GB Core
21:08:25:Unit 02:Version 2.27 (Dec. 15, 2010)
21:08:25:Unit 02:
21:08:25:Unit 02:Preparing to commence simulation
21:08:25:Unit 02:- Ensuring status. Please wait.
21:08:26:Unit 01:
21:08:26:Unit 01:*------------------------------*
21:08:26:Unit 01:Folding@Home GPU Core - Beta
21:08:26:Unit 01:Version 1.24 (Mon Feb 9 11:00:12 PST 2009)
21:08:26:Unit 01:
21:08:26:Unit 01:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
21:08:26:Unit 01:Build host: amoeba
21:08:26:Unit 01:Board Type: AMD
21:08:26:Unit 01:Core      : 
21:08:26:Unit 01:Preparing to commence simulation
21:08:26:Unit 01:- Ensuring status. Please wait.
21:08:28:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
21:08:35:Unit 02:- Looking at optimizations...
21:08:35:Unit 02:- Working with standard loops on this execution.
21:08:35:Unit 02:- Previous termination of core was improper.
21:08:35:Unit 02:- Files status OK
21:08:35:Unit 02:- Expanded 339376 -> 644556 (decompressed 189.9 percent)
21:08:35:Unit 02:Called DecompressByteArray: compressed_data_size=339376 data_size=644556, decompressed_data_size=644556 diff=0
21:08:35:Unit 02:- Digital signature verified
21:08:35:Unit 02:
21:08:35:Unit 02:Project: 7611 (Run 2, Clone 48, Gen 36)
21:08:35:Unit 02:
21:08:35:Unit 02:Entering M.D.
21:08:35:Unit 01:- Looking at optimizations...
21:08:35:Unit 01:- Working with standard loops on this execution.
21:08:35:Unit 01:- Previous termination of core was improper.
21:08:35:Unit 01:- Files status OK
21:08:35:Unit 01:- Expanded 96661 -> 489152 (decompressed 506.0 percent)
21:08:35:Unit 01:Called DecompressByteArray: compressed_data_size=96661 data_size=489152, decompressed_data_size=489152 diff=0
21:08:35:Unit 01:- Digital signature verified
21:08:35:Unit 01:
21:08:35:Unit 01:Project: 5738 (Run 0, Clone 629, Gen 784)
21:08:35:Unit 01:
21:08:35:Unit 01:Entering M.D.
21:08:41:Unit 02:Using Gromacs checkpoints
21:08:41:Unit 02:Mapping NT from 4 to 4 
21:08:41:Unit 01:Will resume from checkpoint file
21:08:41:Unit 01:Tpr hash 01/wudata_01.tpr:  3448772553 478045511 3228322725 2343987963 118795747
21:08:41:Unit 02:Resuming from checkpoint
21:08:41:Unit 02:Verified 02/wudata_01.log
21:08:41:Unit 02:Verified 02/wudata_01.trr
21:08:41:Unit 02:Verified 02/wudata_01.xtc
21:08:41:Unit 02:Verified 02/wudata_01.edr
21:08:41:Unit 02:Completed 295130 out of 2000000 steps  (14%)
21:08:41:Unit 01:Working on Protein
21:08:42:Unit 01:Client config unavailable.
21:08:42:Unit 01:Starting GUI Server
21:08:44:Unit 01:Resuming from checkpoint
21:08:44:Unit 01:fcCheckPointResume: retreived and current tpr file hash:
21:08:44:Unit 01:   0   3448772553   3448772553
21:08:44:Unit 01:   1    478045511    478045511
21:08:44:Unit 01:   2   3228322725   3228322725
21:08:44:Unit 01:   3   2343987963   2343987963
21:08:44:Unit 01:   4    118795747    118795747
21:08:44:Unit 01:Verified 01/wudata_01.log
21:08:44:Unit 01:Verified 01/wudata_01.edr
21:08:44:Unit 01:Verified 01/wudata_01.xtc
21:08:44:Unit 01:Completed 7%
21:12:06:Unit 02:Completed 300000 out of 2000000 steps  (15%)
21:13:12:Unit 01:Completed 8%
21:17:35:Unit 01:Completed 9%
21:22:26:Unit 01:Completed 10%
21:24:38:Unit 02:Completed 320000 out of 2000000 steps  (16%)
21:28:20:Unit 01:Completed 11%
21:31:24:Unit 01:Completed 12%
21:35:02:Unit 01:Completed 13%
21:37:15:Unit 02:Completed 340000 out of 2000000 steps  (17%)
21:40:08:Unit 01:Completed 14%
21:45:09:Unit 01:Completed 15%
21:49:39:Unit 02:Completed 360000 out of 2000000 steps  (18%)
21:50:35:Unit 01:Completed 16%
21:55:25:Unit 01:Completed 17%
21:59:45:Unit 01:Completed 18%
22:01:46:Unit 02:Completed 380000 out of 2000000 steps  (19%)
22:04:47:Unit 01:Completed 19%
22:10:02:Unit 01:Completed 20%
22:13:42:Unit 02:Completed 400000 out of 2000000 steps  (20%)
22:14:19:Unit 01:Completed 21%
22:21:20:Unit 01:Completed 22%
22:25:36:Unit 02:Completed 420000 out of 2000000 steps  (21%)
22:27:48:Unit 01:Completed 23%
22:31:11:Unit 01:Completed 24%
22:34:41:Unit 01:Completed 25%
22:37:46:Unit 02:Completed 440000 out of 2000000 steps  (22%)
22:39:10:Unit 01:Completed 26%
22:46:21:Unit 01:Completed 27%
22:49:32:Unit 02:Completed 460000 out of 2000000 steps  (23%)
22:52:22:Unit 01:Completed 28%
22:58:19:Unit 01:Completed 29%
23:01:42:Unit 02:Completed 480000 out of 2000000 steps  (24%)

Estou usando a versão 7.1.38.

Legal que quando mais demora maior fica o Estimated Credit

jefferson.igorbr · 20 de outubro de 2011

Estou há 8 dias sem conseguir enviar WUs pelo cliente V7

V i X · 20 de outubro de 2011

Estou há 8 dias sem conseguir enviar WUs pelo cliente V7

Putz! Aqui está enviando normalmente...

EribertoTorres · 21 de outubro de 2011

Ardanuy, passe-nos o log, pode ser algum servidor recusando wu. As WU com 10xxx normalmente fazem isso.

Eu digo por hora: evitem o V7.

jefferson.igorbr · 25 de outubro de 2011

Ardanuy, passe-nos o log, pode ser algum servidor recusando wu. As WU com 10xxx normalmente fazem isso.
Eu digo por hora: evitem o V7.

Segue no spoiler :

10:49:00:Unit 02:

10:49:00:Unit 02:*------------------------------*

10:49:00:Unit 02:Folding@Home Gromacs GB Core

10:49:00:Unit 02:Version 2.27 (Dec. 15, 2010)

10:49:00:Unit 02:

10:49:00:Unit 02:Preparing to commence simulation

10:49:00:Unit 02:- Ensuring status. Please wait.

10:49:01:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1

10:49:01:Started thread 8 on PID 4084

10:49:01:WARNING: Exception: Failed to send results to work server: Upload failed

10:49:01:Trying to send results to collection server

10:49:01:Unit 00: Uploading 3.62MiB

10:49:01:Connecting to 171.67.108.25:8080

10:49:04:WARNING: WorkServer connection failed on port 8080 trying 80

10:49:04:Connecting to 171.67.108.25:80

10:49:07:Unit 00: 1.19%

10:49:09:Unit 02:- Looking at optimizations...

10:49:09:Unit 02:- Working with standard loops on this execution.

10:49:09:Unit 02:Examination of work files indicates 8 consecutive improper terminations of core.

10:49:10:Unit 02:- Expanded 663820 -> 1297016 (decompressed 195.3 percent)

10:49:10:Unit 02:Called DecompressByteArray: compressed_data_size=663820 data_size=1297016, decompressed_data_size=1297016 diff=0

10:49:10:Unit 02:- Digital signature verified

10:49:10:Unit 02:

10:49:10:Unit 02:Project: 7200 (Run 51, Clone 2, Gen 25)

10:49:10:Unit 02:

10:49:10:Unit 02:Entering M.D.

10:49:13:Unit 00: 3.13%

10:49:16:Unit 02:Using Gromacs checkpoints

10:49:17:Unit 02:Mapping NT from 4 to 4

10:49:19:Unit 00: 5.07%

10:49:24:Unit 02:Resuming from checkpoint

10:49:24:Unit 02:Verified 02/wudata_01.log

10:49:24:Unit 02:Verified 02/wudata_01.trr

10:49:25:Unit 00: 7.11%

10:49:25:Unit 02:Verified 02/wudata_01.xtc

10:49:25:Unit 02:Verified 02/wudata_01.edr

10:49:26:Unit 02:Completed 581898 out of 750000 steps (77%)

10:49:31:Unit 00: 8.52%

10:49:37:Unit 00: 10.24%

10:49:43:Unit 00: 11.53%

10:49:49:Unit 00: 12.94%

10:49:55:Unit 00: 14.23%

10:50:01:Unit 00: 15.63%

10:50:07:Unit 00: 17.25%

10:50:13:Unit 00: 18.97%

10:50:19:Unit 00: 20.70%

10:50:25:Unit 00: 22.32%

10:50:31:Unit 00: 23.72%

10:50:37:Unit 00: 24.90%

10:50:43:Unit 00: 26.52%

10:50:49:Unit 00: 28.14%

10:50:55:Unit 00: 29.65%

10:51:01:Unit 00: 31.05%

10:51:07:Unit 00: 32.66%

10:51:13:Unit 00: 34.07%

10:51:19:Unit 00: 35.25%

10:51:25:Unit 00: 36.76%

10:51:31:Unit 00: 38.16%

10:51:37:Unit 00: 39.67%

10:51:43:Unit 00: 41.40%

10:51:49:Unit 00: 42.91%

10:51:55:Unit 00: 44.31%

10:52:01:Unit 00: 45.60%

10:52:07:Unit 00: 46.89%

10:52:13:Unit 00: 48.40%

10:52:19:Unit 00: 49.16%

10:52:25:Unit 00: 50.67%

10:52:31:Unit 00: 51.64%

10:52:37:Unit 00: 52.93%

10:52:43:Unit 00: 54.22%

10:52:45:Unit 02:Completed 585000 out of 750000 steps (78%)

10:52:49:Unit 00: 54.98%

10:52:56:Unit 00: 55.84%

10:53:02:Unit 00: 56.92%

10:53:08:Unit 00: 58.32%

10:53:14:Unit 00: 59.40%

10:53:20:Unit 00: 60.37%

10:53:26:Unit 00: 61.66%

10:53:32:Unit 00: 62.85%

10:53:38:Unit 00: 63.28%

10:53:44:Unit 00: 63.50%

10:53:54:Unit 00: 64.36%

10:54:01:Unit 00: 64.79%

10:54:08:Unit 00: 65.33%

10:54:15:Unit 00: 65.54%

10:54:21:Unit 00: 66.08%

10:54:27:Unit 00: 66.84%

10:54:33:Unit 00: 67.48%

10:54:39:Unit 00: 68.35%

10:54:45:Unit 00: 68.89%

10:54:51:Unit 00: 69.21%

10:54:58:Unit 00: 69.75%

10:55:05:Unit 00: 70.29%

10:55:11:Unit 00: 70.93%

10:55:17:Unit 00: 72.01%

10:55:23:Unit 00: 72.87%

10:55:29:Unit 00: 73.95%

10:55:35:Unit 00: 75.03%

10:55:42:Unit 00: 76.00%

10:55:48:Unit 00: 77.08%

10:55:54:Unit 00: 77.83%

10:56:00:Unit 00: 78.91%

10:56:06:Unit 00: 79.99%

10:56:13:Unit 00: 80.74%

10:56:19:Unit 00: 81.71%

10:56:25:Unit 00: 82.58%

10:56:32:Unit 00: 83.33%

10:56:38:Unit 00: 84.52%

10:56:44:Unit 00: 85.38%

10:56:50:Unit 00: 86.35%

10:56:56:Unit 00: 87.21%

10:57:02:Unit 00: 88.51%

10:57:08:Unit 00: 89.80%

10:57:14:Unit 00: 90.88%

10:57:20:Unit 00: 91.85%

10:57:26:Unit 00: 92.93%

10:57:32:Unit 00: 93.57%

10:57:38:Unit 00: 94.43%

10:57:44:Unit 00: 95.73%

10:57:50:Unit 00: 97.02%

10:57:56:Unit 00: 98.10%

10:58:02:Unit 00: 99.39%

10:58:06:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

10:58:06:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

10:58:07:Unit 00: Uploading 3.62MiB

10:58:07:Connecting to 171.64.65.54:8080

10:58:10:WARNING: Exception: Failed to send results to work server: Upload failed

10:58:10:Trying to send results to collection server

10:58:10:Unit 00: Uploading 3.62MiB

10:58:10:Connecting to 171.67.108.25:8080

10:58:13:WARNING: WorkServer connection failed on port 8080 trying 80

10:58:13:Connecting to 171.67.108.25:80

10:58:18:Unit 00: 1.83%

10:58:25:Unit 00: 3.34%

10:58:33:Unit 00: 4.85%

10:58:40:Unit 00: 6.36%

10:58:48:Unit 00: 7.87%

10:58:57:Unit 00: 9.38%

10:59:05:Unit 00: 10.89%

10:59:14:Unit 00: 12.40%

10:59:21:Unit 00: 13.15%

10:59:30:Unit 00: 14.66%

10:59:38:Unit 00: 16.17%

10:59:46:Unit 00: 17.68%

10:59:54:Unit 00: 19.19%

11:00:00:Unit 00: 20.70%

11:00:06:Unit 00: 21.45%

11:00:12:Unit 00: 22.96%

11:00:20:Unit 00: 24.47%

11:00:32:Unit 00: 25.98%

11:00:39:Unit 00: 27.49%

11:00:46:Unit 00: 29.00%

11:00:53:Unit 00: 30.51%

11:01:00:Unit 00: 32.02%

11:01:08:Unit 02:Completed 592500 out of 750000 steps (79%)

11:01:08:Unit 00: 33.53%

11:01:15:Unit 00: 35.04%

11:01:24:Unit 00: 36.55%

11:01:32:Unit 00: 38.05%

11:01:38:Unit 00: 38.81%

11:01:46:Unit 00: 40.32%

11:01:52:Unit 00: 41.83%

11:02:02:Unit 00: 43.77%

11:02:11:Unit 00: 45.28%

11:02:18:Unit 00: 46.79%

11:02:26:Unit 00: 48.30%

11:02:34:Unit 00: 49.80%

11:02:41:Unit 00: 51.31%

11:02:48:Unit 00: 52.07%

11:02:55:Unit 00: 53.58%

11:03:01:Unit 00: 54.98%

11:03:07:Unit 00: 56.49%

11:03:16:Unit 00: 58.00%

11:03:24:Unit 00: 59.51%

11:03:31:Unit 00: 61.02%

11:03:37:Unit 00: 62.53%

11:03:45:Unit 00: 64.03%

11:03:52:Unit 00: 65.54%

11:04:01:Unit 00: 67.05%

11:04:11:Unit 00: 68.78%

11:04:18:Unit 00: 70.29%

11:04:27:Unit 00: 71.80%

11:04:33:Unit 00: 72.55%

11:04:41:Unit 00: 73.31%

11:04:48:Unit 00: 74.81%

11:04:57:Unit 00: 76.32%

11:05:07:Unit 00: 77.83%

11:05:17:Unit 00: 80.10%

11:05:24:Unit 00: 81.61%

11:05:33:Unit 00: 83.12%

11:05:43:Unit 00: 85.60%

11:05:54:Unit 00: 87.10%

11:06:05:Unit 00: 89.37%

11:06:13:Unit 00: 90.88%

11:06:19:Unit 00: 92.39%

11:06:26:Unit 00: 93.90%

11:06:35:Unit 00: 95.41%

11:06:41:Unit 00: 96.91%

11:06:48:Unit 00: 97.67%

11:06:55:Unit 00: 99.18%

11:07:04:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

11:07:05:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:07:05:Unit 00: Uploading 3.62MiB

11:07:05:Connecting to 171.64.65.54:8080

11:07:05:WARNING: Exception: Failed to send results to work server: Upload failed

11:07:05:Trying to send results to collection server

11:07:05:Unit 00: Uploading 3.62MiB

11:07:05:Connecting to 171.67.108.25:8080

11:07:10:WARNING: WorkServer connection failed on port 8080 trying 80

11:07:10:Connecting to 171.67.108.25:80

11:07:11:Unit 00: 0.11%

11:07:17:Unit 00: 7.44%

11:07:29:Unit 00: 8.19%

11:07:51:Unit 00: 8.84%

11:08:08:Unit 00: 9.49%

11:08:19:Unit 00: 11.00%

11:08:28:Unit 00: 11.75%

11:08:47:Unit 00: 12.51%

11:08:54:Unit 00: 15.52%

11:09:10:Unit 02:Completed 600000 out of 750000 steps (80%)

11:09:11:Unit 00: 16.92%

11:09:28:Unit 00: 17.68%

11:09:55:Unit 00: 18.43%

11:10:01:Unit 00: 20.59%

11:10:27:Unit 00: 22.85%

11:10:49:Unit 00: 25.76%

11:11:07:Unit 00: 27.27%

11:11:15:Unit 00: 28.03%

11:11:24:Unit 00: 28.78%

11:11:54:ERROR: Exception: Upload failed

11:11:54:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:11:54:Unit 00: Uploading 3.62MiB

11:11:54:Connecting to 171.64.65.54:8080

11:11:55:WARNING: Exception: Failed to send results to work server: Upload failed

11:11:55:Trying to send results to collection server

11:11:55:Unit 00: Uploading 3.62MiB

11:11:55:Connecting to 171.67.108.25:8080

11:11:59:WARNING: WorkServer connection failed on port 8080 trying 80

11:11:59:Connecting to 171.67.108.25:80

11:12:07:Unit 00: 6.25%

11:12:17:Unit 00: 8.19%

11:12:23:Unit 00: 10.13%

11:12:47:Unit 00: 12.07%

11:13:07:Unit 00: 12.72%

11:13:19:Unit 00: 13.37%

11:13:30:Unit 00: 14.01%

11:13:51:Unit 00: 14.66%

11:14:00:Unit 00: 15.31%

11:14:30:ERROR: Exception: Upload failed

11:14:31:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:14:31:Unit 00: Uploading 3.62MiB

11:14:31:Connecting to 171.64.65.54:8080

11:14:32:WARNING: Exception: Failed to send results to work server: Upload failed

11:14:32:Trying to send results to collection server

11:14:32:Unit 00: Uploading 3.62MiB

11:14:32:Connecting to 171.67.108.25:8080

11:14:38:WARNING: WorkServer connection failed on port 8080 trying 80

11:14:38:Connecting to 171.67.108.25:80

11:14:39:Unit 00: 0.11%

11:14:46:Unit 00: 6.90%

11:15:10:Unit 00: 9.49%

11:15:26:Unit 00: 10.78%

11:15:35:Unit 00: 11.43%

11:15:41:Unit 00: 12.07%

11:15:55:Unit 00: 13.37%

11:16:07:Unit 00: 15.31%

11:16:16:Unit 00: 17.25%

11:16:29:Unit 00: 19.84%

11:16:36:Unit 00: 23.72%

11:16:51:Unit 00: 26.30%

11:16:58:Unit 00: 28.89%

11:16:58:Unit 02:Completed 607500 out of 750000 steps (81%)

11:17:05:Unit 00: 30.83%

11:17:19:Unit 00: 31.48%

11:17:37:Unit 00: 33.42%

11:17:43:Unit 00: 34.71%

11:17:55:Unit 00: 35.36%

11:18:05:Unit 00: 36.01%

11:18:24:Unit 00: 37.30%

11:18:45:Unit 00: 38.59%

11:18:52:Unit 00: 39.24%

11:19:11:Unit 00: 39.89%

11:19:21:Unit 00: 41.18%

11:19:37:Unit 00: 41.83%

11:20:00:Unit 00: 43.12%

11:20:20:Unit 00: 43.77%

11:20:26:Unit 00: 44.41%

11:20:35:Unit 00: 45.71%

11:20:42:Unit 00: 46.36%

11:20:55:Unit 00: 47.65%

11:21:02:Unit 00: 48.40%

11:21:13:Unit 00: 49.05%

11:21:30:Unit 00: 49.70%

11:22:00:ERROR: Exception: Upload failed

11:22:00:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:22:00:Unit 00: Uploading 3.62MiB

11:22:00:Connecting to 171.64.65.54:8080

11:22:01:WARNING: Exception: Failed to send results to work server: Upload failed

11:22:01:Trying to send results to collection server

11:22:01:Unit 00: Uploading 3.62MiB

11:22:01:Connecting to 171.67.108.25:8080

11:22:06:WARNING: WorkServer connection failed on port 8080 trying 80

11:22:06:Connecting to 171.67.108.25:80

11:22:08:Unit 00: 0.11%

11:22:14:Unit 00: 4.96%

11:22:40:Unit 00: 5.61%

11:22:56:Unit 00: 6.25%

11:23:07:Unit 00: 7.55%

11:23:14:Unit 00: 8.84%

11:23:32:Unit 00: 9.49%

11:24:02:Unit 00: 10.13%

11:24:09:Unit 00: 10.78%

11:24:15:Unit 00: 11.43%

11:24:31:Unit 00: 12.72%

11:24:46:Unit 02:Completed 615000 out of 750000 steps (82%)

11:24:48:Unit 00: 14.01%

11:25:06:Unit 00: 15.31%

11:25:18:Unit 00: 15.95%

11:25:34:Unit 00: 16.60%

11:25:47:Unit 00: 17.25%

11:25:55:Unit 00: 17.90%

11:26:04:Unit 00: 19.19%

11:26:12:Unit 00: 19.84%

11:26:24:Unit 00: 21.13%

11:26:54:ERROR: Exception: Upload failed

11:28:52:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:28:52:Unit 00: Uploading 3.62MiB

11:28:52:Connecting to 171.64.65.54:8080

11:28:52:WARNING: Exception: Failed to send results to work server: Upload failed

11:28:52:Trying to send results to collection server

11:28:53:Unit 00: Uploading 3.62MiB

11:28:53:Connecting to 171.67.108.25:8080

11:28:57:WARNING: WorkServer connection failed on port 8080 trying 80

11:28:57:Connecting to 171.67.108.25:80

11:29:00:Unit 00: 0.11%

11:29:19:Unit 00: 7.65%

11:29:29:Unit 00: 9.59%

11:29:39:Unit 00: 12.18%

11:29:46:Unit 00: 12.83%

11:30:00:Unit 00: 13.48%

11:30:14:Unit 00: 14.12%

11:30:25:Unit 00: 14.77%

11:30:42:Unit 00: 15.42%

11:31:01:Unit 00: 16.06%

11:31:11:Unit 00: 16.71%

11:31:17:Unit 00: 17.36%

11:31:34:Unit 00: 18.00%

11:31:48:Unit 00: 18.65%

11:32:01:Unit 00: 19.30%

11:32:08:Unit 00: 19.94%

11:32:21:Unit 00: 20.59%

11:32:42:Unit 00: 21.88%

11:32:48:Unit 00: 23.82%

11:33:10:Unit 00: 25.76%

11:33:19:Unit 00: 29.00%

11:33:42:Unit 00: 29.65%

11:33:57:Unit 02:Completed 622500 out of 750000 steps (83%)

11:33:57:Unit 00: 31.59%

11:34:04:Unit 00: 32.23%

11:34:17:Unit 00: 33.53%

11:34:27:Unit 00: 36.11%

11:34:33:Unit 00: 36.76%

11:34:40:Unit 00: 38.05%

11:34:50:Unit 00: 39.35%

11:34:56:Unit 00: 41.29%

11:35:07:Unit 00: 41.94%

11:35:14:Unit 00: 43.88%

11:35:24:Unit 00: 44.52%

11:35:30:Unit 00: 45.82%

11:35:36:Unit 00: 46.46%

11:36:01:Unit 00: 47.11%

11:36:33:ERROR: Exception: Upload failed

11:39:57:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:39:57:Unit 00: Uploading 3.62MiB

11:39:57:Connecting to 171.64.65.54:8080

11:39:58:WARNING: Exception: Failed to send results to work server: Upload failed

11:39:58:Trying to send results to collection server

11:39:59:Unit 00: Uploading 3.62MiB

11:39:59:Connecting to 171.67.108.25:8080

11:40:02:WARNING: WorkServer connection failed on port 8080 trying 80

11:40:02:Connecting to 171.67.108.25:80

11:40:05:Unit 00: 8.30%

11:40:11:Unit 00: 9.06%

11:40:19:Unit 00: 11.32%

11:40:36:Unit 00: 12.07%

11:40:47:Unit 00: 12.83%

11:40:54:Unit 00: 15.09%

11:41:21:Unit 02:Completed 630000 out of 750000 steps (84%)

11:41:24:Unit 00: 15.85%

11:41:34:Unit 00: 18.11%

11:41:41:Unit 00: 18.87%

11:42:10:Unit 00: 19.62%

11:42:18:Unit 00: 21.88%

11:42:38:Unit 00: 24.15%

11:42:50:Unit 00: 26.30%

11:43:02:Unit 00: 27.81%

11:43:10:Unit 00: 30.08%

11:43:20:Unit 00: 30.83%

11:43:26:Unit 00: 32.34%

11:43:56:ERROR: Exception: Upload failed

11:48:34:Unit 02:Completed 637500 out of 750000 steps (85%)

11:55:40:Unit 02:Completed 645000 out of 750000 steps (86%)

11:57:54:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:57:54:Unit 00: Uploading 3.62MiB

11:57:54:Connecting to 171.64.65.54:8080

11:58:01:Unit 00: 0.11%

11:58:13:WARNING: Exception: Failed to send results to work server: Upload failed

11:58:13:Trying to send results to collection server

11:58:13:Unit 00: Uploading 3.62MiB

11:58:13:Connecting to 171.67.108.25:8080

11:58:33:WARNING: WorkServer connection failed on port 8080 trying 80

11:58:33:Connecting to 171.67.108.25:80

11:58:33:Unit 00: 0.11%

11:58:39:Unit 00: 10.03%

11:58:47:Unit 00: 11.32%

11:58:53:Unit 00: 13.26%

11:58:59:Unit 00: 15.85%

11:59:08:Unit 00: 18.43%

11:59:14:Unit 00: 21.02%

11:59:20:Unit 00: 21.67%

11:59:32:Unit 00: 23.61%

11:59:38:Unit 00: 24.90%

11:59:46:Unit 00: 26.20%

11:59:57:Unit 00: 28.14%

12:00:10:Unit 00: 28.78%

12:00:19:Unit 00: 30.08%

12:00:48:Unit 00: 30.72%

12:00:56:Unit 00: 31.37%

12:01:13:Unit 00: 32.02%

12:01:26:Unit 00: 33.31%

12:01:37:Unit 00: 34.60%

12:01:46:Unit 00: 35.90%

12:02:16:ERROR: Exception: Upload failed

12:03:32:Unit 02:Completed 652500 out of 750000 steps (87%)

12:11:04:Unit 02:Completed 660000 out of 750000 steps (88%)

12:13:45:Slot 00 paused

12:13:45:Slot 00: shutting core down

12:13:45:WARNING: FahCore is known to not shutdown cleanly, killing

12:13:45:WARNING: Killing Unit 02

12:13:45:FahCore, running Unit 02, terminated.

12:26:56:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

12:26:56:Unit 00: Uploading 3.62MiB

12:26:56:Connecting to 171.64.65.54:8080

12:26:59:WARNING: Exception: Failed to send results to work server: Upload failed

12:26:59:Trying to send results to collection server

12:26:59:Unit 00: Uploading 3.62MiB

12:26:59:Connecting to 171.67.108.25:8080

12:27:03:WARNING: WorkServer connection failed on port 8080 trying 80

12:27:03:Connecting to 171.67.108.25:80

12:27:07:Unit 00: 1.40%

12:27:13:Unit 00: 2.70%

12:27:20:Unit 00: 4.10%

12:27:28:Unit 00: 5.50%

12:27:36:Unit 00: 6.14%

12:27:45:Unit 00: 7.44%

12:27:53:Unit 00: 8.73%

12:28:01:Unit 00: 10.03%

12:28:09:Unit 00: 11.32%

12:28:17:Unit 00: 12.61%

12:28:24:Unit 00: 13.91%

12:28:30:Unit 00: 15.20%

12:28:38:Unit 00: 16.49%

12:28:46:Unit 00: 17.79%

12:28:54:Unit 00: 19.08%

12:29:01:Unit 00: 20.37%

12:29:14:Unit 00: 21.67%

12:29:20:Unit 00: 22.96%

12:29:29:Unit 00: 24.36%

12:29:35:Unit 00: 25.66%

12:29:46:Unit 00: 26.95%

12:29:53:Unit 00: 28.24%

12:30:00:Unit 00: 29.54%

12:30:08:Unit 00: 30.83%

12:30:17:Unit 00: 32.77%

12:30:26:Unit 00: 34.07%

12:30:32:Unit 00: 35.36%

12:30:38:Unit 00: 36.65%

12:30:45:Unit 00: 37.95%

12:30:52:Unit 00: 39.24%

12:30:59:Unit 00: 40.53%

12:31:05:Unit 00: 41.83%

12:31:13:Unit 00: 43.12%

12:31:19:Unit 00: 44.41%

12:31:25:Unit 00: 45.71%

12:31:35:Unit 00: 47.65%

12:31:42:Unit 00: 48.94%

12:31:48:Unit 00: 50.24%

12:31:55:Unit 00: 51.53%

12:32:01:Unit 00: 52.82%

12:32:08:Unit 00: 54.12%

12:32:14:Unit 00: 55.41%

12:32:20:Unit 00: 56.70%

12:32:26:Unit 00: 58.00%

12:32:32:Unit 00: 59.29%

12:32:39:Unit 00: 60.58%

12:32:46:Unit 00: 61.88%

12:32:54:Unit 00: 63.17%

12:33:03:Unit 00: 65.11%

12:33:10:Unit 00: 66.41%

12:33:17:Unit 00: 67.70%

12:33:23:Unit 00: 68.99%

12:33:38:Unit 00: 70.29%

12:33:45:Unit 00: 71.58%

12:33:51:Unit 00: 72.87%

12:33:57:Unit 00: 74.17%

12:34:05:Unit 00: 76.11%

12:34:14:Unit 00: 78.05%

12:34:22:Unit 00: 79.99%

12:34:29:Unit 00: 81.28%

12:34:39:Unit 00: 83.22%

12:34:45:Unit 00: 84.52%

12:34:52:Unit 00: 85.81%

12:34:58:Unit 00: 87.10%

12:35:04:Unit 00: 88.40%

12:35:10:Unit 00: 89.69%

12:35:18:Unit 00: 90.99%

12:35:26:Unit 00: 92.28%

12:35:32:Unit 00: 93.57%

12:35:38:Unit 00: 94.87%

12:35:44:Unit 00: 96.16%

12:35:52:Unit 00: 97.45%

12:35:59:Unit 00: 98.75%

12:36:05:Unit 00: 100.00%

12:36:12:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

Zeca Pagodinho · 25 de outubro de 2011

Segue no spoiler :

10:49:00:Unit 02:

10:49:00:Unit 02:*------------------------------*

10:49:00:Unit 02:Folding@Home Gromacs GB Core

10:49:00:Unit 02:Version 2.27 (Dec. 15, 2010)

10:49:00:Unit 02:

10:49:00:Unit 02:Preparing to commence simulation

10:49:00:Unit 02:- Ensuring status. Please wait.

10:49:01:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1

10:49:01:Started thread 8 on PID 4084

10:49:01:WARNING: Exception: Failed to send results to work server: Upload failed

10:49:01:Trying to send results to collection server

10:49:01:Unit 00: Uploading 3.62MiB

10:49:01:Connecting to 171.67.108.25:8080

10:49:04:WARNING: WorkServer connection failed on port 8080 trying 80

10:49:04:Connecting to 171.67.108.25:80

10:49:07:Unit 00: 1.19%

10:49:09:Unit 02:- Looking at optimizations...

10:49:09:Unit 02:- Working with standard loops on this execution.

10:49:09:Unit 02:Examination of work files indicates 8 consecutive improper terminations of core.

10:49:10:Unit 02:- Expanded 663820 -> 1297016 (decompressed 195.3 percent)

10:49:10:Unit 02:Called DecompressByteArray: compressed_data_size=663820 data_size=1297016, decompressed_data_size=1297016 diff=0

10:49:10:Unit 02:- Digital signature verified

10:49:10:Unit 02:

10:49:10:Unit 02:Project: 7200 (Run 51, Clone 2, Gen 25)

10:49:10:Unit 02:

10:49:10:Unit 02:Entering M.D.

10:49:13:Unit 00: 3.13%

10:49:16:Unit 02:Using Gromacs checkpoints

10:49:17:Unit 02:Mapping NT from 4 to 4

10:49:19:Unit 00: 5.07%

10:49:24:Unit 02:Resuming from checkpoint

10:49:24:Unit 02:Verified 02/wudata_01.log

10:49:24:Unit 02:Verified 02/wudata_01.trr

10:49:25:Unit 00: 7.11%

10:49:25:Unit 02:Verified 02/wudata_01.xtc

10:49:25:Unit 02:Verified 02/wudata_01.edr

10:49:26:Unit 02:Completed 581898 out of 750000 steps (77%)

10:49:31:Unit 00: 8.52%

10:49:37:Unit 00: 10.24%

10:49:43:Unit 00: 11.53%

10:49:49:Unit 00: 12.94%

10:49:55:Unit 00: 14.23%

10:50:01:Unit 00: 15.63%

10:50:07:Unit 00: 17.25%

10:50:13:Unit 00: 18.97%

10:50:19:Unit 00: 20.70%

10:50:25:Unit 00: 22.32%

10:50:31:Unit 00: 23.72%

10:50:37:Unit 00: 24.90%

10:50:43:Unit 00: 26.52%

10:50:49:Unit 00: 28.14%

10:50:55:Unit 00: 29.65%

10:51:01:Unit 00: 31.05%

10:51:07:Unit 00: 32.66%

10:51:13:Unit 00: 34.07%

10:51:19:Unit 00: 35.25%

10:51:25:Unit 00: 36.76%

10:51:31:Unit 00: 38.16%

10:51:37:Unit 00: 39.67%

10:51:43:Unit 00: 41.40%

10:51:49:Unit 00: 42.91%

10:51:55:Unit 00: 44.31%

10:52:01:Unit 00: 45.60%

10:52:07:Unit 00: 46.89%

10:52:13:Unit 00: 48.40%

10:52:19:Unit 00: 49.16%

10:52:25:Unit 00: 50.67%

10:52:31:Unit 00: 51.64%

10:52:37:Unit 00: 52.93%

10:52:43:Unit 00: 54.22%

10:52:45:Unit 02:Completed 585000 out of 750000 steps (78%)

10:52:49:Unit 00: 54.98%

10:52:56:Unit 00: 55.84%

10:53:02:Unit 00: 56.92%

10:53:08:Unit 00: 58.32%

10:53:14:Unit 00: 59.40%

10:53:20:Unit 00: 60.37%

10:53:26:Unit 00: 61.66%

10:53:32:Unit 00: 62.85%

10:53:38:Unit 00: 63.28%

10:53:44:Unit 00: 63.50%

10:53:54:Unit 00: 64.36%

10:54:01:Unit 00: 64.79%

10:54:08:Unit 00: 65.33%

10:54:15:Unit 00: 65.54%

10:54:21:Unit 00: 66.08%

10:54:27:Unit 00: 66.84%

10:54:33:Unit 00: 67.48%

10:54:39:Unit 00: 68.35%

10:54:45:Unit 00: 68.89%

10:54:51:Unit 00: 69.21%

10:54:58:Unit 00: 69.75%

10:55:05:Unit 00: 70.29%

10:55:11:Unit 00: 70.93%

10:55:17:Unit 00: 72.01%

10:55:23:Unit 00: 72.87%

10:55:29:Unit 00: 73.95%

10:55:35:Unit 00: 75.03%

10:55:42:Unit 00: 76.00%

10:55:48:Unit 00: 77.08%

10:55:54:Unit 00: 77.83%

10:56:00:Unit 00: 78.91%

10:56:06:Unit 00: 79.99%

10:56:13:Unit 00: 80.74%

10:56:19:Unit 00: 81.71%

10:56:25:Unit 00: 82.58%

10:56:32:Unit 00: 83.33%

10:56:38:Unit 00: 84.52%

10:56:44:Unit 00: 85.38%

10:56:50:Unit 00: 86.35%

10:56:56:Unit 00: 87.21%

10:57:02:Unit 00: 88.51%

10:57:08:Unit 00: 89.80%

10:57:14:Unit 00: 90.88%

10:57:20:Unit 00: 91.85%

10:57:26:Unit 00: 92.93%

10:57:32:Unit 00: 93.57%

10:57:38:Unit 00: 94.43%

10:57:44:Unit 00: 95.73%

10:57:50:Unit 00: 97.02%

10:57:56:Unit 00: 98.10%

10:58:02:Unit 00: 99.39%

10:58:06:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

10:58:06:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

10:58:07:Unit 00: Uploading 3.62MiB

10:58:07:Connecting to 171.64.65.54:8080

10:58:10:WARNING: Exception: Failed to send results to work server: Upload failed

10:58:10:Trying to send results to collection server

10:58:10:Unit 00: Uploading 3.62MiB

10:58:10:Connecting to 171.67.108.25:8080

10:58:13:WARNING: WorkServer connection failed on port 8080 trying 80

10:58:13:Connecting to 171.67.108.25:80

10:58:18:Unit 00: 1.83%

10:58:25:Unit 00: 3.34%

10:58:33:Unit 00: 4.85%

10:58:40:Unit 00: 6.36%

10:58:48:Unit 00: 7.87%

10:58:57:Unit 00: 9.38%

10:59:05:Unit 00: 10.89%

10:59:14:Unit 00: 12.40%

10:59:21:Unit 00: 13.15%

10:59:30:Unit 00: 14.66%

10:59:38:Unit 00: 16.17%

10:59:46:Unit 00: 17.68%

10:59:54:Unit 00: 19.19%

11:00:00:Unit 00: 20.70%

11:00:06:Unit 00: 21.45%

11:00:12:Unit 00: 22.96%

11:00:20:Unit 00: 24.47%

11:00:32:Unit 00: 25.98%

11:00:39:Unit 00: 27.49%

11:00:46:Unit 00: 29.00%

11:00:53:Unit 00: 30.51%

11:01:00:Unit 00: 32.02%

11:01:08:Unit 02:Completed 592500 out of 750000 steps (79%)

11:01:08:Unit 00: 33.53%

11:01:15:Unit 00: 35.04%

11:01:24:Unit 00: 36.55%

11:01:32:Unit 00: 38.05%

11:01:38:Unit 00: 38.81%

11:01:46:Unit 00: 40.32%

11:01:52:Unit 00: 41.83%

11:02:02:Unit 00: 43.77%

11:02:11:Unit 00: 45.28%

11:02:18:Unit 00: 46.79%

11:02:26:Unit 00: 48.30%

11:02:34:Unit 00: 49.80%

11:02:41:Unit 00: 51.31%

11:02:48:Unit 00: 52.07%

11:02:55:Unit 00: 53.58%

11:03:01:Unit 00: 54.98%

11:03:07:Unit 00: 56.49%

11:03:16:Unit 00: 58.00%

11:03:24:Unit 00: 59.51%

11:03:31:Unit 00: 61.02%

11:03:37:Unit 00: 62.53%

11:03:45:Unit 00: 64.03%

11:03:52:Unit 00: 65.54%

11:04:01:Unit 00: 67.05%

11:04:11:Unit 00: 68.78%

11:04:18:Unit 00: 70.29%

11:04:27:Unit 00: 71.80%

11:04:33:Unit 00: 72.55%

11:04:41:Unit 00: 73.31%

11:04:48:Unit 00: 74.81%

11:04:57:Unit 00: 76.32%

11:05:07:Unit 00: 77.83%

11:05:17:Unit 00: 80.10%

11:05:24:Unit 00: 81.61%

11:05:33:Unit 00: 83.12%

11:05:43:Unit 00: 85.60%

11:05:54:Unit 00: 87.10%

11:06:05:Unit 00: 89.37%

11:06:13:Unit 00: 90.88%

11:06:19:Unit 00: 92.39%

11:06:26:Unit 00: 93.90%

11:06:35:Unit 00: 95.41%

11:06:41:Unit 00: 96.91%

11:06:48:Unit 00: 97.67%

11:06:55:Unit 00: 99.18%

11:07:04:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

11:07:05:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:07:05:Unit 00: Uploading 3.62MiB

11:07:05:Connecting to 171.64.65.54:8080

11:07:05:WARNING: Exception: Failed to send results to work server: Upload failed

11:07:05:Trying to send results to collection server

11:07:05:Unit 00: Uploading 3.62MiB

11:07:05:Connecting to 171.67.108.25:8080

11:07:10:WARNING: WorkServer connection failed on port 8080 trying 80

11:07:10:Connecting to 171.67.108.25:80

11:07:11:Unit 00: 0.11%

11:07:17:Unit 00: 7.44%

11:07:29:Unit 00: 8.19%

11:07:51:Unit 00: 8.84%

11:08:08:Unit 00: 9.49%

11:08:19:Unit 00: 11.00%

11:08:28:Unit 00: 11.75%

11:08:47:Unit 00: 12.51%

11:08:54:Unit 00: 15.52%

11:09:10:Unit 02:Completed 600000 out of 750000 steps (80%)

11:09:11:Unit 00: 16.92%

11:09:28:Unit 00: 17.68%

11:09:55:Unit 00: 18.43%

11:10:01:Unit 00: 20.59%

11:10:27:Unit 00: 22.85%

11:10:49:Unit 00: 25.76%

11:11:07:Unit 00: 27.27%

11:11:15:Unit 00: 28.03%

11:11:24:Unit 00: 28.78%

11:11:54:ERROR: Exception: Upload failed

11:11:54:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:11:54:Unit 00: Uploading 3.62MiB

11:11:54:Connecting to 171.64.65.54:8080

11:11:55:WARNING: Exception: Failed to send results to work server: Upload failed

11:11:55:Trying to send results to collection server

11:11:55:Unit 00: Uploading 3.62MiB

11:11:55:Connecting to 171.67.108.25:8080

11:11:59:WARNING: WorkServer connection failed on port 8080 trying 80

11:11:59:Connecting to 171.67.108.25:80

11:12:07:Unit 00: 6.25%

11:12:17:Unit 00: 8.19%

11:12:23:Unit 00: 10.13%

11:12:47:Unit 00: 12.07%

11:13:07:Unit 00: 12.72%

11:13:19:Unit 00: 13.37%

11:13:30:Unit 00: 14.01%

11:13:51:Unit 00: 14.66%

11:14:00:Unit 00: 15.31%

11:14:30:ERROR: Exception: Upload failed

11:14:31:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:14:31:Unit 00: Uploading 3.62MiB

11:14:31:Connecting to 171.64.65.54:8080

11:14:32:WARNING: Exception: Failed to send results to work server: Upload failed

11:14:32:Trying to send results to collection server

11:14:32:Unit 00: Uploading 3.62MiB

11:14:32:Connecting to 171.67.108.25:8080

11:14:38:WARNING: WorkServer connection failed on port 8080 trying 80

11:14:38:Connecting to 171.67.108.25:80

11:14:39:Unit 00: 0.11%

11:14:46:Unit 00: 6.90%

11:15:10:Unit 00: 9.49%

11:15:26:Unit 00: 10.78%

11:15:35:Unit 00: 11.43%

11:15:41:Unit 00: 12.07%

11:15:55:Unit 00: 13.37%

11:16:07:Unit 00: 15.31%

11:16:16:Unit 00: 17.25%

11:16:29:Unit 00: 19.84%

11:16:36:Unit 00: 23.72%

11:16:51:Unit 00: 26.30%

11:16:58:Unit 00: 28.89%

11:16:58:Unit 02:Completed 607500 out of 750000 steps (81%)

11:17:05:Unit 00: 30.83%

11:17:19:Unit 00: 31.48%

11:17:37:Unit 00: 33.42%

11:17:43:Unit 00: 34.71%

11:17:55:Unit 00: 35.36%

11:18:05:Unit 00: 36.01%

11:18:24:Unit 00: 37.30%

11:18:45:Unit 00: 38.59%

11:18:52:Unit 00: 39.24%

11:19:11:Unit 00: 39.89%

11:19:21:Unit 00: 41.18%

11:19:37:Unit 00: 41.83%

11:20:00:Unit 00: 43.12%

11:20:20:Unit 00: 43.77%

11:20:26:Unit 00: 44.41%

11:20:35:Unit 00: 45.71%

11:20:42:Unit 00: 46.36%

11:20:55:Unit 00: 47.65%

11:21:02:Unit 00: 48.40%

11:21:13:Unit 00: 49.05%

11:21:30:Unit 00: 49.70%

11:22:00:ERROR: Exception: Upload failed

11:22:00:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:22:00:Unit 00: Uploading 3.62MiB

11:22:00:Connecting to 171.64.65.54:8080

11:22:01:WARNING: Exception: Failed to send results to work server: Upload failed

11:22:01:Trying to send results to collection server

11:22:01:Unit 00: Uploading 3.62MiB

11:22:01:Connecting to 171.67.108.25:8080

11:22:06:WARNING: WorkServer connection failed on port 8080 trying 80

11:22:06:Connecting to 171.67.108.25:80

11:22:08:Unit 00: 0.11%

11:22:14:Unit 00: 4.96%

11:22:40:Unit 00: 5.61%

11:22:56:Unit 00: 6.25%

11:23:07:Unit 00: 7.55%

11:23:14:Unit 00: 8.84%

11:23:32:Unit 00: 9.49%

11:24:02:Unit 00: 10.13%

11:24:09:Unit 00: 10.78%

11:24:15:Unit 00: 11.43%

11:24:31:Unit 00: 12.72%

11:24:46:Unit 02:Completed 615000 out of 750000 steps (82%)

11:24:48:Unit 00: 14.01%

11:25:06:Unit 00: 15.31%

11:25:18:Unit 00: 15.95%

11:25:34:Unit 00: 16.60%

11:25:47:Unit 00: 17.25%

11:25:55:Unit 00: 17.90%

11:26:04:Unit 00: 19.19%

11:26:12:Unit 00: 19.84%

11:26:24:Unit 00: 21.13%

11:26:54:ERROR: Exception: Upload failed

11:28:52:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:28:52:Unit 00: Uploading 3.62MiB

11:28:52:Connecting to 171.64.65.54:8080

11:28:52:WARNING: Exception: Failed to send results to work server: Upload failed

11:28:52:Trying to send results to collection server

11:28:53:Unit 00: Uploading 3.62MiB

11:28:53:Connecting to 171.67.108.25:8080

11:28:57:WARNING: WorkServer connection failed on port 8080 trying 80

11:28:57:Connecting to 171.67.108.25:80

11:29:00:Unit 00: 0.11%

11:29:19:Unit 00: 7.65%

11:29:29:Unit 00: 9.59%

11:29:39:Unit 00: 12.18%

11:29:46:Unit 00: 12.83%

11:30:00:Unit 00: 13.48%

11:30:14:Unit 00: 14.12%

11:30:25:Unit 00: 14.77%

11:30:42:Unit 00: 15.42%

11:31:01:Unit 00: 16.06%

11:31:11:Unit 00: 16.71%

11:31:17:Unit 00: 17.36%

11:31:34:Unit 00: 18.00%

11:31:48:Unit 00: 18.65%

11:32:01:Unit 00: 19.30%

11:32:08:Unit 00: 19.94%

11:32:21:Unit 00: 20.59%

11:32:42:Unit 00: 21.88%

11:32:48:Unit 00: 23.82%

11:33:10:Unit 00: 25.76%

11:33:19:Unit 00: 29.00%

11:33:42:Unit 00: 29.65%

11:33:57:Unit 02:Completed 622500 out of 750000 steps (83%)

11:33:57:Unit 00: 31.59%

11:34:04:Unit 00: 32.23%

11:34:17:Unit 00: 33.53%

11:34:27:Unit 00: 36.11%

11:34:33:Unit 00: 36.76%

11:34:40:Unit 00: 38.05%

11:34:50:Unit 00: 39.35%

11:34:56:Unit 00: 41.29%

11:35:07:Unit 00: 41.94%

11:35:14:Unit 00: 43.88%

11:35:24:Unit 00: 44.52%

11:35:30:Unit 00: 45.82%

11:35:36:Unit 00: 46.46%

11:36:01:Unit 00: 47.11%

11:36:33:ERROR: Exception: Upload failed

11:39:57:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:39:57:Unit 00: Uploading 3.62MiB

11:39:57:Connecting to 171.64.65.54:8080

11:39:58:WARNING: Exception: Failed to send results to work server: Upload failed

11:39:58:Trying to send results to collection server

11:39:59:Unit 00: Uploading 3.62MiB

11:39:59:Connecting to 171.67.108.25:8080

11:40:02:WARNING: WorkServer connection failed on port 8080 trying 80

11:40:02:Connecting to 171.67.108.25:80

11:40:05:Unit 00: 8.30%

11:40:11:Unit 00: 9.06%

11:40:19:Unit 00: 11.32%

11:40:36:Unit 00: 12.07%

11:40:47:Unit 00: 12.83%

11:40:54:Unit 00: 15.09%

11:41:21:Unit 02:Completed 630000 out of 750000 steps (84%)

11:41:24:Unit 00: 15.85%

11:41:34:Unit 00: 18.11%

11:41:41:Unit 00: 18.87%

11:42:10:Unit 00: 19.62%

11:42:18:Unit 00: 21.88%

11:42:38:Unit 00: 24.15%

11:42:50:Unit 00: 26.30%

11:43:02:Unit 00: 27.81%

11:43:10:Unit 00: 30.08%

11:43:20:Unit 00: 30.83%

11:43:26:Unit 00: 32.34%

11:43:56:ERROR: Exception: Upload failed

11:48:34:Unit 02:Completed 637500 out of 750000 steps (85%)

11:55:40:Unit 02:Completed 645000 out of 750000 steps (86%)

11:57:54:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

11:57:54:Unit 00: Uploading 3.62MiB

11:57:54:Connecting to 171.64.65.54:8080

11:58:01:Unit 00: 0.11%

11:58:13:WARNING: Exception: Failed to send results to work server: Upload failed

11:58:13:Trying to send results to collection server

11:58:13:Unit 00: Uploading 3.62MiB

11:58:13:Connecting to 171.67.108.25:8080

11:58:33:WARNING: WorkServer connection failed on port 8080 trying 80

11:58:33:Connecting to 171.67.108.25:80

11:58:33:Unit 00: 0.11%

11:58:39:Unit 00: 10.03%

11:58:47:Unit 00: 11.32%

11:58:53:Unit 00: 13.26%

11:58:59:Unit 00: 15.85%

11:59:08:Unit 00: 18.43%

11:59:14:Unit 00: 21.02%

11:59:20:Unit 00: 21.67%

11:59:32:Unit 00: 23.61%

11:59:38:Unit 00: 24.90%

11:59:46:Unit 00: 26.20%

11:59:57:Unit 00: 28.14%

12:00:10:Unit 00: 28.78%

12:00:19:Unit 00: 30.08%

12:00:48:Unit 00: 30.72%

12:00:56:Unit 00: 31.37%

12:01:13:Unit 00: 32.02%

12:01:26:Unit 00: 33.31%

12:01:37:Unit 00: 34.60%

12:01:46:Unit 00: 35.90%

12:02:16:ERROR: Exception: Upload failed

12:03:32:Unit 02:Completed 652500 out of 750000 steps (87%)

12:11:04:Unit 02:Completed 660000 out of 750000 steps (88%)

12:13:45:Slot 00 paused

12:13:45:Slot 00: shutting core down

12:13:45:WARNING: FahCore is known to not shutdown cleanly, killing

12:13:45:WARNING: Killing Unit 02

12:13:45:FahCore, running Unit 02, terminated.

12:26:56:Sending unit results: id:00 state:SEND project:6055 run:0 clone:142 gen:452 core:0xa3 unit:0x5f91be564e9c1c7901c4008e000017a7

12:26:56:Unit 00: Uploading 3.62MiB

12:26:56:Connecting to 171.64.65.54:8080

12:26:59:WARNING: Exception: Failed to send results to work server: Upload failed

12:26:59:Trying to send results to collection server

12:26:59:Unit 00: Uploading 3.62MiB

12:26:59:Connecting to 171.67.108.25:8080

12:27:03:WARNING: WorkServer connection failed on port 8080 trying 80

12:27:03:Connecting to 171.67.108.25:80

12:27:07:Unit 00: 1.40%

12:27:13:Unit 00: 2.70%

12:27:20:Unit 00: 4.10%

12:27:28:Unit 00: 5.50%

12:27:36:Unit 00: 6.14%

12:27:45:Unit 00: 7.44%

12:27:53:Unit 00: 8.73%

12:28:01:Unit 00: 10.03%

12:28:09:Unit 00: 11.32%

12:28:17:Unit 00: 12.61%

12:28:24:Unit 00: 13.91%

12:28:30:Unit 00: 15.20%

12:28:38:Unit 00: 16.49%

12:28:46:Unit 00: 17.79%

12:28:54:Unit 00: 19.08%

12:29:01:Unit 00: 20.37%

12:29:14:Unit 00: 21.67%

12:29:20:Unit 00: 22.96%

12:29:29:Unit 00: 24.36%

12:29:35:Unit 00: 25.66%

12:29:46:Unit 00: 26.95%

12:29:53:Unit 00: 28.24%

12:30:00:Unit 00: 29.54%

12:30:08:Unit 00: 30.83%

12:30:17:Unit 00: 32.77%

12:30:26:Unit 00: 34.07%

12:30:32:Unit 00: 35.36%

12:30:38:Unit 00: 36.65%

12:30:45:Unit 00: 37.95%

12:30:52:Unit 00: 39.24%

12:30:59:Unit 00: 40.53%

12:31:05:Unit 00: 41.83%

12:31:13:Unit 00: 43.12%

12:31:19:Unit 00: 44.41%

12:31:25:Unit 00: 45.71%

12:31:35:Unit 00: 47.65%

12:31:42:Unit 00: 48.94%

12:31:48:Unit 00: 50.24%

12:31:55:Unit 00: 51.53%

12:32:01:Unit 00: 52.82%

12:32:08:Unit 00: 54.12%

12:32:14:Unit 00: 55.41%

12:32:20:Unit 00: 56.70%

12:32:26:Unit 00: 58.00%

12:32:32:Unit 00: 59.29%

12:32:39:Unit 00: 60.58%

12:32:46:Unit 00: 61.88%

12:32:54:Unit 00: 63.17%

12:33:03:Unit 00: 65.11%

12:33:10:Unit 00: 66.41%

12:33:17:Unit 00: 67.70%

12:33:23:Unit 00: 68.99%

12:33:38:Unit 00: 70.29%

12:33:45:Unit 00: 71.58%

12:33:51:Unit 00: 72.87%

12:33:57:Unit 00: 74.17%

12:34:05:Unit 00: 76.11%

12:34:14:Unit 00: 78.05%

12:34:22:Unit 00: 79.99%

12:34:29:Unit 00: 81.28%

12:34:39:Unit 00: 83.22%

12:34:45:Unit 00: 84.52%

12:34:52:Unit 00: 85.81%

12:34:58:Unit 00: 87.10%

12:35:04:Unit 00: 88.40%

12:35:10:Unit 00: 89.69%

12:35:18:Unit 00: 90.99%

12:35:26:Unit 00: 92.28%

12:35:32:Unit 00: 93.57%

12:35:38:Unit 00: 94.87%

12:35:44:Unit 00: 96.16%

12:35:52:Unit 00: 97.45%

12:35:59:Unit 00: 98.75%

12:36:05:Unit 00: 100.00%

12:36:12:ERROR: Exception: Server responded: HTTP_GATEWAY_TIME_OUT

Tenta através de um servidor proxy, quem sabe vai...

Zeca Pagodinho · 28 de outubro de 2011

Recentemente o pessoal de Stanford saiu da pasmaceira e deu uma mexida boa no projeto do V7. Atualmente o cliente está bem mais estável e já possui opções de troca do layout bem interessantes.

Aos que, como eu, usam Linux, aqui vai uma dica importante: o V7 funciona perfeitamente rodando sobre o layer da versão 2.6 do Python. Tentei instalar com a versão 2.7 e não obtive sucesso. Só funcionou depois que recompilei todos os pacotes, que já estavam otimizados para o Python 2.7, para a versão 2.6.

NÃO UTILIZEM VERSÕES INFERIORES à 7.1.36. Há bugs sérios nessas versões. Eu vinha usando a versão 7.1.33 e tive vários problemas, os quais parecem ter sido sanados até a 7.1.38.

Ainda não consegui acesso remoto para utilizar o próprio cliente V7 como controlador da produção, assim como os monitores HFM, FahMon, etc., mas também não tentei com essa nova versão. Se alguém tiver experiência com isso, por favor poste as configurações necessárias para a gente poder ir criando um tutorial específico a respeito.

jefferson.igorbr · 28 de outubro de 2011

Recentemente o pessoal de Stanford saiu da pasmaceira e deu uma mexida boa no projeto do V7. Atualmente o cliente está bem mais estável e já possui opções de troca do layout bem interessantes.
Aos que, como eu, usam Linux, aqui vai uma dica importante: o V7 funciona perfeitamente rodando sobre o layer da versão 2.6 do Python. Tentei instalar com a versão 2.7 e não obtive sucesso. Só funcionou depois que recompilei todos os pacotes, que já estavam otimizados para o Python 2.7, para a versão 2.6.

NÃO UTILIZEM VERSÕES INFERIORES à 7.1.36. Há bugs sérios nessas versões. Eu vinha usando a versão 7.1.33 e tive vários problemas, os quais parecem ter sido sanados até a 7.1.38.

Ainda não consegui acesso remoto para utilizar o próprio cliente V7 como controlador da produção, assim como os monitores HFM, FahMon, etc., mas também não tentei com essa nova versão. Se alguém tiver experiência com isso, por favor poste as configurações necessárias para a gente poder ir criando um tutorial específico a respeito.

Atualizando cliente em 3...2...1

EribertoTorres · 28 de outubro de 2011

Zeca, ganha um joinha Excelente notícia

Só faltam eles mexerem nos servidores para receberem as wus, e que parada é essa do Python? É a versão do Python que eu tenho que ter instalada? E no meu caso que vivo de apt-get update/upgrade? Faço as atualizações manualmente?

Zeca Pagodinho · 28 de outubro de 2011

Zeca, ganha um joinha Excelente notícia
Só faltam eles mexerem nos servidores para receberem as wus, e que parada é essa do Python? É a versão do Python que eu tenho que ter instalada? E no meu caso que vivo de apt-get update/upgrade? Faço as atualizações manualmente?

O sistema pode ter várias versões instaladas em slots diferentes. O Python é um interpretador, seus arquivos ficam disponíveis numa árvore de diretórios específica para cada versão instalada, então você escolhe qual delas é a versão para uso. No Gentoo (sempre falo em nome dessa distribuição, não uso outra), o script que faz os links simbólicos (softlink, como o Eriberto costuma se referir) para a versão a ser usada é o "eselect".

Eriberto, como você usa uma distribuição que não costuma compilar seus pacotes no usuário final, elas já vêm compiladas, acho que não tem esse problema de configuração do Python. Até tem pacote para Debian e Ubuntu já pronto para instalar. Mas para quem vai se Gentoo, Slackware e seus derivados, isso é importante deixar claro.